[Logic] 1010# Blues

[Bob Johnson]

After much playing and fiddling over the last few days, I finally went to
TOOLS, SETUP, List of valid Values.  Low and behold, K1RAW was the first on
the
list.  I went back and ran the DB maint. tools again to index, pack, & sort
and
had negative results in finding K1RAW, it still jumped from none to #2, W4HWA
!!!

I finally decided to delete the whole 1010# list after reading that the 1010
list maint tool was just for UPDATING.

I then reloaded the 1010.txt file of 12/09/01 (same one I had been using) and 
sure enough K1RAW was there as #1 !!!

I then tried a manual search on WA1DUZ and got a valid return in the 60K
region, then tried my old call WA1OFR, 1010# 71195 and got the same old error
message.  This has to be a problem with either FoxPro or Logic. I hope Dennis
can shed some light on this, as it has been verified as a problem by many
Logic
users.

I would suggest that you might consider deleting your old 1010# list before
loading the new one due out in the next couple of weeks, just to make sure you
have the latest info in your 1010 List.

73 es GL
Bob, K1VU

At 04:46 PM 01/10/02 , you wrote:
>Bob, When I look at my drop down menu on my log form for 10-10#, the first 
>entry in (none), the second entry is 1 K1RAW, the second is 2 W4HWA .....
the 
>last is 72938 KC5VGD.
>
>If 1 K1RAW is missing and you have all the rest, look at ur list of valid 
>values and see if it is there, if not add it.
>
>BTW, when I enter WA1OFR it finds 71195 with the usual log entry process,
but 
>if I do a search on WA1OFR I do get the error message. Interesting!
>
>73,
>George K3GV
>
>DX: Long may it live !
>If it isn't LOGic it isn't LOGging !
>_______________________________________________
>LOGic mailing list
>LOGic@mailman.qth.net
><http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/mail
man/listinfo/logic
>