[Logic] 1010# Blues

Fri, 11 Jan 2002 05:48:52 -0600

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of Ken "AB5A" Eckel
> Sent: Thursday, January 10, 2002 23:17
> To: [email protected]
> Subject: RE: [Logic] 1010# Blues
>
>
> I would like to d/l the list.  Where is it?
>

http://hds.net/win1010dl.htm


> 73,
> Ken AB5A
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of GilBaronW0MN
> Sent: Thursday, January 10, 2002 3:43 PM
> To: [email protected]
> Subject: RE: [Logic] 1010# Blues
>
>
> I downloaded the latest today. I think it is December 9.
> I could not normally search and find WA1OFR as I pointed out in
> my post. It
> got the same error that you reported. I could find it if I put the call in
> as a new contact in the log screen, it then found the call and showed the
> correct number, VERY HIGH, like 71000 something.
>
> I am using logic 5.3.128
>
>
> > -----Original Message-----
> > From: [email protected] [mailto:[email protected]]On
> > Behalf Of Bob Johnson
> > Sent: Thursday, January 10, 2002 14:07
> > To: [email protected]
> > Subject: RE: [Logic] 1010# Blues
> >
> >
> > Hi Gil:
> > Your sucess is interesting.  Can you tell me what the date of
> the 1010.txt
> > file
> > is that you installed ???  Also what version of Logic ???
> >
> > I installed three versions of 1010.txt (2 from november & 1 from
> > December) and
> > none of them will show K1RAW as #1.  I installed 1010.txt following the
> > directions Anthony A Boykin wb2jri posted here in response to
> > your query on
> > this
> > subject.
> >
> > The lastest version of 1010.txt should be out in the next week or so.
> >
> > One thing you didn't mention was if you could manually search and
> > find WA1OFR.
> >
> > TNX for your input.
> > 73
> > Bob, K1VU
> >
> > At 12:07 PM 01/10/02 , you wrote:
> > >
> > >
> > >> -----Original Message-----
> > >> From: [email protected]
> > [<mailto:[email protected]%5DOn>mailto:logic-admin@mailm
> > an.qth.net
> > ]On
> > >> Behalf Of Bob Johnson
> > >> Sent: Thursday, January 10, 2002 10:35
> > >> To: [email protected]; [email protected]
> > >> Subject: Re: [Logic] 1010# Blues
> > >>
> > >>
> > >> Hi George:
> > >> What you suggested had already been done and works fine for all
> > >> calls except
> > >> K1RAW, which it can't find !!!
> > >>
> > >> What I was talking about was doing a MANUAL SEARCH by clicking on
> > >> the search
> > >> button to the right of the 1010# info window (setup as user4).
> > >>
> > >> If you try this yourself you will see that the list starts with
> > >> "None" and the
> > >> next entry is 2 W4HWA, totally skiping 1 which is K1RAW.� K1RAW
> > >
> > >
> > >Not on mine, on mine it starts with NONE and then K1RAW.
> > >
> > >> is the first
> > >> entry in the 1010.txt file if you look at the file with
> > notepad.� There is
> > >> either a problem with the 1010.txt file or a problem with how
> > >> Dennis reads the
> > >> file into Logic.
> > >>
> > >> Next try entering WA1OFR in the search window and click on find,
> > >> you will get
> > >> the "Invalid Subscript Reference" Error.� If you then click on
> > >> the "Ignore"
> > >> button the list should have stoped at 1010# 65044, KC5DCU !!!
> > >> This may be a
> > >> Logic problem.
> > >>
> > >
> > >If I enter WA1OFR I do get the invalid subscript. This is obviously a
> > >problem, probably with logic, but maybe it could also be the
> file. Dennis
> > >needs to look at this.
> > >
> > >On the other hand, if I enter WA1OFR as a new contact it
> > properly finds his
> > >1010 number. The problem is only on a manual Search. You can do
> > the manual
> > >search by entering it as a new contact.
> > >I agree that should not be required.
> > >
> > >
> > >
> > >> Please try it out and let me know what you get for results.
> > >>
> > >> 73
> > >> Bob, K1VU /ex:WA1OFR
> > >>
> > >> At 06:44 PM 01/09/02 , you wrote:
> > >> >Bob, here is the info I posted in LOGic TIps and Tricks. It
> > works for me.
> > >> >
> > >> >Page 63 - Subj: Utility to Import 1010 Database
> > >> >From: [email protected] (George Vincent - George K3GV)
> > >> >There is a utility to import 1010 database form available on the
> > >> internet.
> > >> >See
> > <<http://hds.net/win1010dl.htm>http://hds.net/win1010dl.htm><http:
> //hds.net/
> win1010dl.htm>http://hds.net/win1010dl.htm.
> >> Download the
> >> 1010.TXT file and unzip it.
> >> >Run Import 1010 from tools/misc utilities.Placing this
> >> expression in Copy
> >> >>From Prefix Table looks up the callsign from the description
> >> field in the
> >> >1010 list, and automatically logs the 1010 number.
> >> >MAKE_TAG("1010#:", GETLISTVALUE("1010#", LOG.CALL))
> >> >You need to have 10 -10 Number as one of your fields on your
> >> logform. Access
> >> >Copy From Prefix Table from "Log ->Setup"
> >> >
> >> >
> >> >
> >> >73,
> >> >George K3GV
> >> >
> >> >DX: Long may it live !
> >> >If it isn't LOGic it isn't LOGging !
> >> >
> >>
> >> _______________________________________________
> >> LOGic mailing list
> >> [email protected]
> >>
> <http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.
net/mailma
n/listinfo/logic
>>
>
>_______________________________________________
>LOGic mailing list
>[email protected]
><http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/mail
man/listinfo/logic
>

_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic

_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic

_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic