[Logic] Does LOGic 6 use the Windows clipboard COPY PASTE capability?

Mon, 2 Dec 2002 17:21:22 -0600

I don't like this either. It is one of the various places that Logic does
not follow standard procedure in the user interface. nevertheless , you can
do a copy with Ctl-C and a paste with Ctl-V.
By the way. Logic is NOT the only program that does nto do this correctly.
they are all of them wrong, but they do it.,

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of Jim Shaw
> Sent: Monday, December 02, 2002 4:37 PM
> To: [email protected]
> Subject: [Logic] Does LOGic 6 use the Windows clipboard COPY PASTE
> capability?
>
>
> Ok - I tried to do a compound log search and wanted to use the Windows
> clipboard but found that the traditional Windows COPY and PASTE commands
> don't work.  In this case, all I want to do was copy the phrase  - CALL= -
> to the clipboard and paste it repeatedly followed by typing a
> different call
> each time.
>
> It has been my experience that the Windows COPY/PASTE (clipboard)
> functions
> are disabled everywhere in LOGic 6.  For instance, I would like to use it
> now and then to modify CW function key contents and it doesn't work there.
>
> Does anyone know how to get it to COPY and/or PASTE (via the Windows
> clipboard)?
>
> 73 de Jim WA6PX
> [email protected]
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of Gil Baron
> Sent: Monday, December 02, 2002 2:04 PM
> To: [email protected]; [email protected]
> Subject: RE: [Logic] Spot Log Appearances
>
>
> That is the common way of using the interface but it is not part
> of windows.
> It is totally up to the application to do this. It must get the event and
> then do the sort.
>
>
> > -----Original Message-----
> > From: [email protected] [mailto:[email protected]]On
> > Behalf Of k0dan
> > Sent: Monday, December 02, 2002 3:43 PM
> > To: [email protected]; [email protected]
> > Subject: RE: [Logic] Spot Log Appearances
> >
> >
> > Don't know if this is a Windows or Microsoft standard but many
> apps allow
> > the user to sort an arrary of columns by double clicking at the top of a
> > column...once clicked, that column becomes the basis of for the
> > sorted data.
> > Double clicking it again inverts the sort of the column (e.g.
> ascending to
> > descending, etc.). Also, in some apps it is possible to drag an entire
> > column to a different location on the array.
> >
> > Can't recall which LOGIC windows I've wished had these particular sort
> > features, but it'd be very handy for the SPOT log in particular.
> >
> > 73,
> >
> > Dan
> > K0DAN
> >
> >
> > > 73,   Carl   VE9OV
> > >   ----- Original Message -----
> > >   From: Ben Hatheway
> > >   To: PDA
> > >   Cc: [email protected]
> > >   Sent: Sunday, December 01, 2002 11:30 PM
> > >   Subject: [Logic] Spot Log Appearances
> > >
> > >
> > >   Dennis:
> > >
> > >   In your release notes, you indicate:
> > >
> > >   >6.0.127 BETA
> > >
> > >   >The spot log now displays spots in reverse chronological order
> > > based on the time received, not the timestamp from the webcluster.
> > >
> > >   Not sure this change is better, especially when using
> > > webcluster. When loading 25 at a time, the latest spot posted for
> > > a given station,  which may contain needed updated information
> > > about that posted spot, can sometimes be found in the center of
> > > the group instead of the top where it used to be. Before, the
> > > latest posts were at the top of the list. Now I have to take the
> > > time to look down at each of the spots and their corresponding
> > > timestamps to be sure that I have the latest information about a
> > > particular station, since his frequency may have changed, or he
> > > is listening on a different frequency. This takes more time and I
> > > have to scroll to the appropriate spot to assure that the rig
> > > will go to the correct frequency. I have missed some spots, or
> > > clicked on some higher in the list only to have the rig go to an
> > > incorrect frequency because he QSY's
> > >
> > >   I guess I can see this in a radio packet cluster environment,
> > > but when retrieving up to 250 spots at a time, which can happen,
> > > or only 25, it makes it more difficult to land the correct DX contact.
> >
> > >
> > >   I hope you will consider changing this back, or making it a
> > > setup option...
> > >
> > >   thanks
> > >
> > >   Ben Hatheway
> > >
> > >   N6FM
> > >
> > >
> > >
> > >
> > >
> > >   --- StripMime Report -- processed MIME parts ---
> > >   multipart/alternative
> > >     text/plain (text body -- kept)
> > >     text/html
> > >   The reason this message is shown is because the post was in HTML
> > >   or had an attachment. Attachments are not allowed.
> > >   Please post in Plain-Text only.---
> > >   _______________________________________________
> > >   LOGic mailing list
> > >   [email protected]
> > >   http://mailman.qth.net/mailman/listinfo/logic
> > >
> > >
> > > --- StripMime Report -- processed MIME parts ---
> > > multipart/alternative
> > >   text/plain (text body -- kept)
> > >   text/html
> > > The reason this message is shown is because the post was in HTML
> > > or had an attachment. Attachments are not allowed.
> > > Please post in Plain-Text only.---
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>