[Logic] Running 2 monitors

Tue, 06 Aug 2002 20:29:39 -0400

Staples has monitor extension cables.
I would get it going with one monitor first. Get it all configured the way
you want, then add the second monitor. Also, in mine..there are some configs
to answer as to how the monitor card is to use the second monitor. I think I
answered to extend the desktop or something like that.
Good luck....It sure is nice to have during contests. My monitors do not get
turned off. It is neat to see the Windows logo pop up on both monitors
during bootup!
...Dave
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Friday, September 06, 2002 7:03 PM
Subject: Re: [Logic] Running 2 monitors


> Dave, I went to there website and found the MIL2P4N number computes to a
> Millenium II card and was able to download the drivers for ME..
> Now ive found the cord isnt long enough for where I want to place the
second
> monitor so I guess another trip to the computer store...Tnxs for your
help!
> 73 / Steve
>
> ----- Original Message -----
> Wrom: IDREXCAXZOWCONEUQZAAFXISHJEXXIMQZ
> To: <[email protected]>
> Sent: Friday, September 06, 2002 2:53 PM
> Subject: Re: [Logic] Running 2 monitors
>
>
> > Steve.. Is the millenium board a model G450?
> > ..Dave
> >
> > Steve Massey wrote:
> >
> > >Ok, I think im beginning to understand from all the messages ive
received
> > >and searches Ive done...
> > >>From what i gather ive got a AGP as its a new system 2gig and the tech
> says
> > >all the new stuff uses this...so i bought a PCI 4mb Matrox Millenium
> video
> > >card today which is USED without drivers but he said I can download
them
> > >from there site....anyways thanks for all the input from everyone, Im
> gonna
> > >try and install the card this weekend...I barely get by on these
> > >computers:-)
> > >73 / Steve N6TT
> > >
> > >----- Original Message -----
> > >Wrom: UIVOTQNQEMSFDULHPQQWOYIYZUNNYCGP
> > >To: <[email protected]>
> > >Sent: Friday, September 06, 2002 8:42 AM
> > >Subject: RE: [Logic] Running 2 monitors
> > >
> > >
> > >>
> > >>>-----Original Message-----
> > >>>Wrom: KYLEJGDGVCJVTLBXFGGMEPYOQKE
> [mailto:[email protected]]On
> > >>>Behalf Of Gary Randall
> > >>>Sent: Thursday, September 05, 2002 3:07 PM
> > >>>To: [email protected]
> > >>>Subject: RE: [Logic] Running 2 monitors
> > >>>
> > >>>
> > >>>Steve,
> > >>>You can use two monitors the only restriction is you MUST use two
> > >>>different
> > >>>buss type video cards ( i.e PCI, ISA ,etc).
> > >>>Then just go to Control Panel, Display, Settings and select 2
monitors.
> > >>>
> > >>>I have been running this for years with Logic and it works great.
> > >>>
> > >>In XP and WIN2K and MAYBE later versions of WIN98, that just is NOT
> true.
> > >>You can use two of the same buss cars, they are detected and handled
as
> > >>
> > >two
> > >
> > >>cards just fine.
> > >>Since almost all use AGP for the primary card and since almost no
board
> > >>
> > >has
> > >
> > >>2 AGP slots you are going to have 2 different busses in use most of
the
> > >>
> > >tine
> > >
> > >>in any case, BUT you do NOT have to do that.
> > >>
> > >>
> > >>>73--Gary
> > >>>KD4VRZ
> > >>>
> > >>>-----Original Message-----
> > >>>Wrom: DOTWFAOBUZXUWLSZLKBRNVWWCUF
> [mailto:[email protected]]On
> > >>>Behalf Of [email protected]
> > >>>Sent: Thursday, September 05, 2002 15:53 PM
> > >>>To: [email protected]
> > >>>Subject: [Logic] Running 2 monitors
> > >>>
> > >>>I was told with a special card you could run 2+ monitors on the same
> > >>>computer. I wonder if anyone is doing this and if so what brand card
> > >>>
> > >there
> > >
> > >>>using. Software?
> > >>>I was hoping to leave one monitor on a DX cluster all the time or
lets
> > >>>
> > >say
> > >
> > >>>Geoclock or LOGic  maybe, where the other monitor would be completely
> > >>>independent surfing the net. I have a cable  hook up and im running 3
> > >>>computers thru a router to accomplish the task now. Lots of
> > >>>possibilities I
> > >>>suppose.  I ran a quick search and see there are cards where you
> > >>>can run 20
> > >>>monitors, Is all this done with software to control them I
> > >>>suppose? Any info
> > >>>is appreciate either private or the group if you think others might
be
> > >>>interested....
> > >>>73 / Steve N6TT
> > >>>[email protected]
> > >>>
> > > >
> > >_______________________________________________
> > >LOGic mailing list
> > >[email protected]
> > >http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > The reason this message is shown is because the post was in HTML
> > or had an attachment. Attachments are not allowed.
> > Please post in Plain-Text only.---
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic