[Logic] Error in Logic 6.0

Sat, 20 Apr 2002 11:09:56 -0500

I found the user fields icon on the log form and was able to add the 101#
filed as one of the user fields. I do not have the search capability. The
help file says any field with a predefined set of values which this field
does have (over 70000 of them) will have a drop down list to search. What am
I missing here. In logic 5 it did have that field. I suppose I did something
wrong in setting up the list but I am not sure what it is. Help appreciated
here.
 TIA

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of 4X6UO
> Sent: Saturday, April 20, 2002 7:03 AM
> To: [email protected]
> Subject: Re: [Logic] Error in Logic 6.0
>
>
> Hi I have a similar problem i wrote Dennis and I am still waiting
> for help .
>                                                            Arie - 4X6UO
> 1010# 45820
> ==============================================================
>
> > I went into my list table and deleted the 1010# list. I then imported a
> > older list from March 2002. Doing this,did not cure the
> problem. Cleaning
> > indexes and updating awards did not help. I did get an error when trying
> to
> > import the 1010.txt file.
> > "prg12e.err [Read Only]" -
> > #include 'pda.h'
> > Error in line 3: File does not exist.
> > When I ignore the error, it loads data.
> >
> > Does anyone have any suggestions.
> >
> > Roland
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Stephen J. Schrack" <[email protected]>
> > To: <[email protected]>
> > Sent: Saturday, April 20, 2002 8:08 AM
> > Subject: RE: [Logic] Error in Logic 6.0
> >
> >
> > > I am experiencing a similar problem, but not quite the same. Mine only
> > > happens when the 1010 number is a high number. In other
> words, The 1010
> > > automatic lookup (or manual) works fine until the 1010 number
> happens to
> > > be one of the higher numbers (60,000 or higher). Then I get the error
> > > message described below. Sometimes I can recover from that though. I
> > > suspect it is a corruption of the 1010 list and was going to wait and
> > > see if the next 1010.txt has the same issue. Perhaps the corruption
> > > takes place during import? My platform is WinXP Professional 384MB RAM
> > > on a 1ghz workstation.
> > >
> > > Best 73 de N3MX...STEVE
> > >
> > > -----Original Message-----
> > > From: [email protected] [mailto:[email protected]]
> > > On Behalf Of Roland Guidry
> > > Sent: Saturday, April 20, 2002 8:39 AM
> > > To: [email protected]
> > > Subject: [Logic] Error in Logic 6.0
> > >
> > > I am have difficulty with this new program, Logic 6.0 Build 6.0.104.
> > > When my
> > > cursor passes over the userfield 1010#, I get an error as
> shown with the
> > > attached gif pic. When I chose "no" the program exits and when
> > > restarted, I
> > > have to perform a clean then restart.
> > >
> > > Sometime I get an error message that says "Invalid Subscript
> Reference"
> > > Cancel or Ignore. If  I "Ignore" program continues to run, if
> I cancel I
> > > get
> > > other errors reported.
> > >
> > > The file I downloaded for 1010#'s came from Win1010 using
> their 1010.txt
> > > file. I do not have this problem with Logic 5.
> > >
> > > Has anyone encountered this same problem. I email [email protected] on
> > > 4/18,
> > > no response to date.
> > >
> > > Roland, WA5CHX
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>