[Laser] Wanted Laser's for VUCC Attempt

[Les Rayburn]

Zack makes a great point. Perhaps we're looking at our potential sites 
in the wrong manner. We were working off the advice of some microwave 
rovers,
who pointed us to the spots we've scouted, but we may be able to shorten 
the necessary distances to about 90 miles or less even here in the tree 
covered
Southeast.

So, anyone want to build or sell a couple of units capable of covering a 
90 mile path?

73,

Les Rayburn, N1LF



On 3/27/2012 8:19 AM, Zack Widup wrote:
> Hi Les,
>
> Why do you need 180 miles? If you can choose your locations carefully,
> you can sit in a grid close to its corner and work north or south
> across the next grid to the second one over maybe a 75 mile path. For
> instance, I can operate in EM59xx and get the first four grids over a
> few mile path, then work someone in EN51xa which would be 75 miles to
> the north.
>
> Fortunately for me, there is a big hill in EM59xx.
>
> 10 GHz is much easier. I have 12 grids on 10 GHz right now.
>
> 73, Zack W9SZ
>
> On 3/27/12, Les Rayburn<les at highnoonfilm.com>  wrote:
>> Bottom line. I've buried under at work right now, with very little time
>> for homebrew projects or experimentation. For two seasons now, I've
>> plotted and planned an attempt at VUCC with another local ham on both 10
>> GHz and Laser (or LED).
>>
>> We've done a lot of the "homework" involved, including plotting tons of
>> tropo maps, and visiting three of the four grids required for the
>> attempt. Suitable
>> sites have been found in all of them. We also have 10 GHz units and
>> dishes ready to go.
>>
>> Sitting on the workbench are a variety of laser based projects that
>> haven't gotten off the ground. Ramsey kits, frensel lenses from Staples,
>> and other
>> parts. A 2" piece of PVC with a homebrew fine tuning-screw adjustment
>> sits nearby, unfinished.
>>
>> Basically, I'm time starved, but still hunger to achieve VUCC on these
>> bands before my partner loses interest. So here is my proposition:
>>
>> 1.) I'm willing to pay someone to build a matched pair of laser or LED
>> units capable of communicating over the required 180 mile path necessary
>> to cover five grids. I'm looking for turn-key r, ready to go units that
>> can be mounted on heavy duty photographers tripods and used immediately.
>>
>> 2.) Unit can be new or used, as long as it works, and can reach the
>> required distances reliably. We do understand that there is a steep learning
>> curve, especially has it applies to aiming, but hope to accomplish our
>> goal over a period of no more than three weekends.
>>
>> We'll operate from a grid intersection, and get the four required grids
>> quickly, then drive to the 5th grid and make the more detailed attempt
>> from there. Once
>> one of us is successful, we'll switch places and do it all over again.
>>
>> Please let me know (off list) if you're willing to build or sell two
>> such units to us, and your asking price. We also need to know your time
>> frame. We want to try
>> our first attempt in July during our mutual vacations.
>>
>>
>> --
>> 73,
>>
>> *Les Rayburn, N1LF*
>> EM63nf
>> 121 Mayfair Park Maylene, AL 35114
>> 6M VUCC #1712
>> Grid Pirates #222
>> Life Member Central States VHF
>>
>> ______________________________________________________________
>> Laser mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/laser
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Laser at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>