[Laser] PWM of LED in QST

[Mike]

But if you'll notice the transmitter schematic is missing. Since you "may"
be wondering, I do have it. However, after reading what Clint posted I am
hesitant to just 'arbitrarily' post it in the open forum.

I suppose if I were asked I could post it and say, "it's NOT for open
publication" and answer each on a individual basis. I mean no harm to Ramsey
to be sure, nor do I have ANY interest in commercially making them
available. Period.

So, the "floor is open".

Mike C.

-----Original Message-----
From: laser-bounces at mailman.qth.net [mailto:laser-bounces at mailman.qth.net]
On Behalf Of laser
Sent: Wednesday, September 29, 2010 7:05 PM
To: Free Space LASER Communications
Subject: Re: [Laser] PWM of LED in QST


----- Original Message ----- 
From: "C. Turner" <turner at ussc.com>
To: <laser at mailman.qth.net>
Sent: Wednesday, September 29, 2010 7:46 PM
Subject: Re: [Laser] PWM of LED in QST

> In talking about the Ramsey kit, I note that their manual - freely
> available online - has excised from it the schematic.  I'm not sure what
> this means, but I (personally) would be reluctant to post it online for
> all to see.
========================================
I'm confused.  I just downloaded the manual from the Ramsey website and 
there is a schematic in the manual.

The manual is available from their website at the following url:
www.ramseyelectronics.com/downloads/manuals/LBC6K.pdf

Schematic is on page 24...

?????

The manual is copyrighted 2002 so it's probably best that anyone wanting 
this info download it rather than posting it here.... 

______________________________________________________________
Laser mailing list
Home: http://mailman.qth.net/mailman/listinfo/laser
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Laser at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html