[Laser] And furthermore

[laser@mailman.qth.net]

Just did a quick test and set the Laser up in the Living room and 
allowing 2 hops off the Hall wall into the shack

You cant see the light from the Laser in the shack

All the other lights are turned off but the PC screen was up

Using a Spectrum analyzing program ARGO I was able to see the 14 Khz 
signal from the Ramsey TX as a trace. The 14 Khz frequency appears to be 
stable enough to go to even slower analysis .I was using the 20 second
dot setting
on ARGO

this was with the PGP circuit feeding the LF converter and tuned to 14
Khz

NOW the bitch

This pen doesnt put out a proper signal and the dot is 3 to4 inches
across at 20 Ft
It looks like the diode may have some thing on it which is smearing the
signal
has anyone taken one of these apart or should I just yell at Ramsey for a
replacement

Lotsa fun anyhow

Bob  K3DJC