[Laser] Laser Communications in the Sacramento, Ca. area.

[Kerry Banke]

Jim - Boy, you didn't waste any time putting up the magazine articles. I
believe there is one more issue that I don't happen to have on my computer
here at work & will get that to you soon. That article covers the original
LED version. I should make an article showing the mods which added Laser
pointer capability and micrometer pointing adjustment for longer distance
contacts. The receiver didn't change.  

 I  recently purchased a few surplus  Dichroic filter plates (maybe 3X5")
which appear to work well with my 650 nm  laser pointers. I found I'm not
much good at cutting glass but have been able to roughly cut a good number
of maybe 1/2" squares. I'm willing to pass these out to serious
experimenters that have some form of working optical tranceivers with laser
pointers  as I know I had a tough time getting a hold of my first filters
to play with.

 - Kerry N6IZW -

  

At 06:45 PM 5/14/02 -0700, you wrote:
>OOPs I posted the wrong location.
>The articles are up on the site now..
>Thanks Kerry and Chuck!
>
>http://www.qsl.net/wb9ajz/laser/
>
>
>Jim
>N9JIM/6
>> 
>> 
>
>
>_______________________________________________
>Laser mailing list
>Laser@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/laser