[Lafayette] HA-800B

[Ron via Lafayette]

I was wondering if anyone out there that owns one of these old girls would care to correspond.
I have several HA-600s, and a regular HA-800 and now two 800Bs. The most recent one has been through cosmetic restoration and it needs an alignment. It's pretty far off frequency.
Once on the bench, I'm going to check the caps with one of my ESR meters, calibrate the 100 KHz marker and do the alignment.

Anyone been through the alignment, especially "T1"?
This had me confused for a while, since it is:
1. never shown on the layout diagram
2. none of the boards are marked

The rest should be pretty easy.
Coupla things I wanted to mention: I replaced the line cord with a modern 3 wire job. I wanted to add either a BNC or Coax connector to the chassis. Boy, there is just a lack of space.
Lastly, what is up with the 'plate' covering what appears to be a 12 VDC connector in the back of the chassis?

thanks and happy Lafayette ownership....

ron
N4UE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/lafayette/attachments/20140921/9ee60229/attachment.html>