[Lafayette] PLEASE help with HA-460 power cord question!!!!

[bonddaleena at aol.com]

Pete, thank you again!!! Great people on this site!!!

ron
N4UE


-----Original Message-----
From: manualman <manualman at juno.com>
To: lafayette at mailman.qth.net
Sent: Fri, Aug 14, 2009 5:33 pm
Subject: Re: [Lafayette] PLEASE help with HA-460 power cord question!!!!



Jumper 7 to 8 is incorrect. I just checked both HA-460 schematics and
both HA-410 schematics since there were changes in the models. Both used
the same AC and DC connections. Jumper 8 to 9 is correct. A jumper from 
7
to 8 is correct only on the 12 DC cord for the negative return. If you
have a jumper between 7 and 8, which is wrong, then in order for the rig
to work, the DC polarity switch must be set in one of two positions. If
your AC plug is wired as I described, and as per the schematics, the DC
polarity switch is non-functionable, which it should be, if your running
from AC power.

Pete, wa2cwa

On Fri, 14 Aug 2009 14:00:40 -0700 "WB6BLV    \(DM06\)"
<wb6blv at inreach.com> writes:
> my 460 AC power cable connector is wired as follows:
>
> 1  \
>      110 VAC
> 3  /
>
>
> 4  \
>       jumper together
> 5  /
>
>
> 7  \
>       jumper together
> 8  /
>
>
> 2, 6, 10, 11   no connection
>
>
> John
> WB6BLV at inreach.com
______________________________________________________________
Lafayette mailing list
Home: http://mailman.qth.net/mailman/listinfo/lafayette
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lafayette at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html