[Lafayette] HA-350

[Bonddaleena at aol.com]

In a message dated 11/16/2005 9:50:31 AM Eastern Standard Time,  
mwells at gcea.coop writes:

Hello to  the group. Ron, I have a HA-350 with an original manual and
schematic. If  you havent found the schematic yet I will be glad to copy it
and send it  your way. The HA-350 was the rcvr I dreamed about as a Novice
but could  never afford. Its been fun to play with and will have it paired up
with a  Globe Scout 65A, my original novice transmitter. With the mechanical
filter  it is really to narrow to enjoy listening to AM with it. I have
bridged a  cap across the filter to open it up and works good on AM that way.
I tried  to switch the cap in and out from the back of the chassis but the
leads  were too long so I plan on monuting a switch close to the filter and
use a  long shaft to turn the switch. I think I can use the hole in the rear
of  the chassis, where you would make the 20 meter trap adjustment to  avoid
butchering this unit up.

Mike
W0FD

-----Original  Message-----
From:  lafayette-bounces at mailman.qth.net
[mailto:lafayette-bounces at mailman.qth.net]On  Behalf Of
Bonddaleena at aol.com
Sent: Friday, November 11, 2005 6:06  PM
To: lafayette at mailman.qth.net
Subject: [Lafayette]  HA-350


Hello. I have an HA-350 in good physical condition, but the  previous owner
was a butcher. I have the Manual, but I need a schematic. I  have tried BAMA,
etc. with no luck. Any  suggestions???


tnx

Ron

N4UE
_______________________________________________
Lafayette  mailing  list
Lafayette at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/lafayette



_______________________________________________
Lafayette  mailing  list
Lafayette at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/lafayette



Hi Mike. Thank you for the offer, but I was finally able to download the  
Manual and Schematic.
As far as the switched cap goes...my radio had one also. Unfortunatly, the  
previous owner drilled a hole in the front panel and had some REAL long leads  
going to it. Rather ineffective, I would imagine.
 
Where exactly is your extra cap located? I removed mine a long time ago,  now 
I can't remember where it was. ha ha
 
I'll try the mod. It it works, I'll use a small RS relay right next to the  
affected part.  
 
73 Ron
 
N4UE