[Kenwood] TM-732A battery location

[Brian Harris]

Gary, 

You are correct about its location. It is a coin shape but is soldered in. The battery measures 3.26V so I don’t think it’s the problem. I’ll replace it anyway and make sure to touch up any questionable solder connections. 

Thank you. Brian WA5UEK 

Sent from my iPhone

> On May 10, 2022, at 6:37 PM, Gary <gary_mayfield at hotmail.com> wrote:
> 
> Pretty sure it is a coin cell. My memory isn't what it used to be, but maybe on the back side of the circuit board attached to the front of the radio body. Sandwiched between the circuit board and the case..
> 
> Good Luck and 73,
> Joe kk0sd
> 
> -----Original Message-----
> From: kenwood-bounces at mailman.qth.net <kenwood-bounces at mailman.qth.net> On Behalf Of Brian Harris via Kenwood
> Sent: Tuesday, May 10, 2022 2:07 PM
> To: Kenwood <kenwood at mailman.qth.net>
> Subject: [Kenwood] TM-732A battery location
> 
> My 732 occasionally loses its mind (programming).  I suspect it might be a bad backup battery. I’ve opened the top and bottom covers and even removed the front panel looking for it. Where is it and what does it look like?  I take it that it’s not a little round thing that looks like a coin.
> 
> WA5UEK 
> 
> Sent from my iPhone
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html