[Kenwood] Electrolytic or tantalum capacitors?

[JF Samuels - K2CIB]

 From Techwalla:
"A tantalum, or tantalum oxide, capacitor is actually a type of 
electrolytic capacitor. They are available in small SMD (surface-mount 
device) packaging and are polarized like aluminum oxide capacitors. 
However, tantalum oxide capacitors have a much higher capacitance value 
for their size. They are more expensive than aluminum oxide, but they 
are more reliable, more stable and they operate better at certain 
frequencies. Tantalum capacitors are often used as "decoupling" or 
"bypass" capacitors, which reduce electronic "noise" in digital circuits."
So I would say, "Yes."
*

*/73, John/*



*
On 1/2/2022 9:58 AM, Steef PA2A wrote:
> I am repairing my '93 TS-50S where the aluminum electrolytic capacitors have begun to leak the same way they did in my '89 TS-850S. Should I replace them by tantalum capacitors? Next thing to investigate is the TS-590S that is about ten years old. I 'd like to get rid of the leaking electrolytics.
>
> 73s Steef PA2A
> ______________________________________________________________
> Kenwood mailing list
> Home:http://mailman.qth.net/mailman/listinfo/kenwood
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Kenwood at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html