From af5cc2 at gmail.com Thu Feb 11 12:37:37 2021 From: af5cc2 at gmail.com (John Geiger) Date: Thu, 11 Feb 2021 11:37:37 -0600 Subject: [Kenwood] TS2000 ACC2 jack and power out Message-ID: I recently purchased a used Kenwood TS2000, made in January 2012. I am looking at getting it on FT8 and other digital modes, but have found a few old postings on the internet stating that when using the ACC2 jack for audio in on the digital modes, it takes 3 to 4 seconds to reach full power on transmit. I have had a TS2000 in the past and used it with a Signalink USB interface and can't remember if this was a problem with it or not. Is that a common problem for all TS2000s? Did they fix it at some point and does anyone know the serial number range or firmware version where this issue was fixed? 73 John AF5CC From W3BJ at outlook.com Thu Feb 11 13:02:08 2021 From: W3BJ at outlook.com (John Dize) Date: Thu, 11 Feb 2021 18:02:08 +0000 Subject: [Kenwood] TS2000 ACC2 jack and power out In-Reply-To: References: Message-ID: Not a problem for me . But I use signalink usb and my wsjt 2 will not recognize at 2000. In radio block I put none. Vox for Tx and it works. With no delay in Tx. I don?t understand why but it doesn?t see 2000 Get Outlook for iOS ________________________________ From: kenwood-bounces at mailman.qth.net on behalf of John Geiger Sent: Thursday, February 11, 2021 12:37:37 PM To: kenwood at mailman.qth.net Subject: [Kenwood] TS2000 ACC2 jack and power out I recently purchased a used Kenwood TS2000, made in January 2012. I am looking at getting it on FT8 and other digital modes, but have found a few old postings on the internet stating that when using the ACC2 jack for audio in on the digital modes, it takes 3 to 4 seconds to reach full power on transmit. I have had a TS2000 in the past and used it with a Signalink USB interface and can't remember if this was a problem with it or not. Is that a common problem for all TS2000s? Did they fix it at some point and does anyone know the serial number range or firmware version where this issue was fixed? 73 John AF5CC ______________________________________________________________ Kenwood mailing list Home: http://mailman.qth.net/mailman/listinfo/kenwood Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Kenwood at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From holden7471 at msn.com Tue Feb 23 00:44:25 2021 From: holden7471 at msn.com (howard holden) Date: Tue, 23 Feb 2021 05:44:25 +0000 Subject: [Kenwood] Classic Exchange Winter 2021 CW Message-ID: The CW portion of Winter 2021 CX will take place on Sunday Feb 28 1400Z to Mar 1 0800Z Tuesday Mar 2 1400Z to Mar 3 0800Z. The CX is a no-pressure contest celebrating the older commercial and Home Brew equipment that was the pride and joy of ham shacks many decades ago. The object is to encourage restoration, operation and enjoyment of this older Classic equipment. You need not operate a Classic rig to participate in the CX. You may use any rig in the contest although new gear is a distinct scoring disadvantage as your multipliers are directly related to the age of the equipment you use! However, you can still work the "great ones" with modern equipment. Call: "CQ CX" Suggested CW frequencies +/- QRM: 160M 1.810 80M 3.545 40M 7.045 20M 14.045 15M 21.045 10M 28.045 6M 50.095 2M 144.100 Listen up and down for stations using crystal control. The bonus points this Winter are for E.F. Johnson equipment. Full details at http://www.classicexchange.org/announcments/Winter_2021_CX_Rules.pdf Questions? Contact e-mail: K3MSB: myscupper at gmail.com or K2RP: k2rp at arrl.net or contact me! 73, Howie WB2AWQ/7 WB2AWQ at arrl.net Sent from Mail for Windows 10