[Kenwood] TS-530S low RX on 40m

[Steve H]

Steve

Yes, forgot to mention I wound up cleaning the bandswitch quite a few times 
with deox-it. Theres some improvement
but it appears theres still issues.

I ran into a video regarding "peaking" the coils on the RF board that I 
wonder if its worth a try.

This radio was owned by a a heavy smoker, so when I cleaned the band switch, 
and powered up the radio,
some sizzling and sparking came out monentarily, as I guess the niccotine 
coating blended with the deox-it
and took longer to dry than I expected. Luckily no noticable damage took 
place as I immediately removed power
and let it dry fully before further tests.

--
Steve Hearns
KA2PTE

----- Original Message ----- 
From: "Steve Sutfin" <stephoto at mind.net>
To: "Steve H" <teknoskillz at comcast.net>
Cc: <kenwood at mailman.qth.net>
Sent: Thursday, May 14, 2020 4:52 PM
Subject: Re: [Kenwood] TS-530S low RX on 40m


> Hi Steve,
>  One thing that comes to mind about hybrids is that besides having 
> mechanical switches and buttons ( my FT-901 has a bunch ) they still  use 
> the old fashioned band switch. I clean and 'work' the switches/ buttons 
> frequently as maintenance but If your issue is not on all  bands cleaning 
> the band switch contacts is the first place I would  start.
> 73,
> Steve k7dna
>
> On May 14, 2020, at 1:32 PM, Steve H wrote:
>
>> I have a condition where rx on this band seems very low.  Sort of 
>> present on 20m at times too.
>>
>> The S meter  barely moves at all, theres no noise level but I can  hear 
>> stations.
>> The drive knob kind of behaves like a really wide tuner where the 
>> signals get higher
>> as you move it fully ccw.
>>
>> When I put the cal signal on, I can hear it but theres no s meter  level 
>> at
>> all.
>>
>> Other bands seem to have noise levels and the drive / tune function
>> resonates properly, but overall
>> I think the rx gain seems sort of lacking "robust" is the best way to
>> describe it.
>>
>> I posted about this in a Kenwood hybrid group and I think they said  its 
>> a common problem in most of some of the
>> hybrids, but cannot recall what they said actually is going on  causing 
>> it. I remember they said the cal signal ought to be
>> alot stronger than what I reported.
>>
>> I caught alof of flack from them for not "reading the manuals"  first 
>> before posting for help, then somehow what I said as a reply was
>> studied by the mods, and deemed as "threatening" so I left, and  thought 
>> I would try here.
>>
>> --
>> Steve Hearns
>> KA2PTE
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Kenwood at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>