[Kenwood] ts430s

[cemilton at aol.com]

Hi Roland,
Does the rig have the auto-tuner in place???
73ChuckW4MIL

-----Original Message-----
From: ROLAND HOWELL via Kenwood <kenwood at mailman.qth.net>
To: kenwood at mailman.qth.net <kenwood at mailman.qth.net>
Sent: Wed, Mar 4, 2020 3:17 pm
Subject: [Kenwood] ts430s

Good Evening Gents
I am trying to resurrect a TS430s, I have dealt with the deafness using the low current method as detailed on the reflector, still have a problem with RF out, basically there is non I do however have an intermittent heavy current drawn but with no output.
The finals have been changed from the standard pair to a pair of 2sc****, I have had to replace the co-ax input and output leads, the wires are very fragile!.
Has anybody come across this problem, if so what did you find and possible cure
Thanks in anticipation
Snowy  
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html