[Kenwood] R-5000 AM filter

[Al S.]

Thanks for replying. I understand that there's the 6kc filter on a board,
that plugs directly into the receiver, (the A1 filter), and the wired in
filter the YK-88A.

My question is when I remove the stock AM filter board from the receiver,
can I solder in the new wired in filter onto that board, and plug that
board back into the receiver.

Thanks.

On Wed, Nov 13, 2019, 3:47 PM Clif Holland <clif at avvid.com> wrote:

> The Kenwood filters are the same. Just one is mounted on a board.
>
> Clif Holland KA5IPF
>
> On 11/13/2019 2:44 PM, Al S. wrote:
> > I recently got hold of a R-5000 and would like to upgrade the wide AM
> > filter.
> >
> > I've seen the 6kc plugin filter available from Inrad, but also wired in
> > type original filters on eBay which are much more affordable. Can I use
> the
> > wired in YK-88A filter on the existing AM board, or is the plugin type
> the
> > only way to go.
> > Thanks guys.
> > ______________________________________________________________
> > Kenwood mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/kenwood
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Kenwood at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>