From k4txj at arrl.net  Wed Jul 10 16:57:12 2019
From: k4txj at arrl.net (Jim Vaughan, K4TXJ)
Date: Wed, 10 Jul 2019 16:57:12 -0400
Subject: [Kenwood] QUESTION ABOUT SIGNALINK
Message-ID: <48C19B2BB4C3423F8E696DF0E1405213@jim>

On a Kenwood TS-590 where do you plug the SignaLink?
I can't locate the instructions on the SignaLink.
I just got this TS-590.  Had it on a TS-570.

Thanks,
Jim, K4TXJ

From kenw8ek at gmail.com  Fri Jul 12 14:01:31 2019
From: kenw8ek at gmail.com (Ken, W8EK)
Date: Fri, 12 Jul 2019 14:01:31 -0400
Subject: [Kenwood] Need Mic holder for MC-50
Message-ID: <4b381558-a0df-2bad-d5dd-bb4724b7f4ac@gmail.com>


I have a Kenwood MC-50 desk mic.  The mic works fine, and the PTT 
switches on the base are fine, but some one broke the black plastic 
"clip" that holds the microphone to the base.

I know it is a long shot, but does anyone have one they would like to 
sell, or know where one can be obtained?  Any help would be very much 
appreciated.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400







.



From bhighland at nc.rr.com  Fri Jul 12 14:18:08 2019
From: bhighland at nc.rr.com (bhighland)
Date: Fri, 12 Jul 2019 14:18:08 -0400
Subject: [Kenwood] Need Mic holder for MC-50
In-Reply-To: <4b381558-a0df-2bad-d5dd-bb4724b7f4ac@gmail.com>
Message-ID: <mailman.20856.1562955506.2818.kenwood@mailman.qth.net>

Ken,Will a standard mic holder work? If so, try the internet for mic holders.73ByronSent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: "Ken, W8EK" <kenw8ek at gmail.com> Date: 7/12/19  14:01  (GMT-05:00) To: Kenwood List <kenwood at mailman.qth.net> Subject: [Kenwood] Need Mic holder for MC-50 I have a Kenwood MC-50 desk mic.? The mic works fine, and the PTT switches on the base are fine, but some one broke the black plastic "clip" that holds the microphone to the base.I know it is a long shot, but does anyone have one they would like to sell, or know where one can be obtained?? Any help would be very much appreciated.Thanks.73,Ken, W8EKKen SimpsonE-mail to W8EK at FLHam.net or W8EK at arrl.netVoice Phone? (352) 732-8400.______________________________________________________________Kenwood mailing listHome: http://mailman.qth.net/mailman/listinfo/kenwoodHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Kenwood at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html

From bhighland at nc.rr.com  Fri Jul 12 15:06:00 2019
From: bhighland at nc.rr.com (bhighland)
Date: Fri, 12 Jul 2019 15:06:00 -0400
Subject: [Kenwood] Need Mic holder for MC-50
In-Reply-To: <4b381558-a0df-2bad-d5dd-bb4724b7f4ac@gmail.com>
Message-ID: <mailman.20857.1562958370.2818.kenwood@mailman.qth.net>

Ken,Try this, actually, look at it and see if it maybe will work.73 de K4BMH?Byron?https://www.sweetwater.com/store/detail/GFWMICCLIPW--gator-frameworks-gfw-mic-clipw-wireless-microphone-clipSent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: "Ken, W8EK" <kenw8ek at gmail.com> Date: 7/12/19  14:01  (GMT-05:00) To: Kenwood List <kenwood at mailman.qth.net> Subject: [Kenwood] Need Mic holder for MC-50 I have a Kenwood MC-50 desk mic.? The mic works fine, and the PTT switches on the base are fine, but some one broke the black plastic "clip" that holds the microphone to the base.I know it is a long shot, but does anyone have one they would like to sell, or know where one can be obtained?? Any help would be very much appreciated.Thanks.73,Ken, W8EKKen SimpsonE-mail to W8EK at FLHam.net or W8EK at arrl.netVoice Phone? (352) 732-8400.______________________________________________________________Kenwood mailing listHome: http://mailman.qth.net/mailman/listinfo/kenwoodHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Kenwood at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html

From walter.dilley at gmail.com  Sat Jul 13 00:39:04 2019
From: walter.dilley at gmail.com (Walter Dilley)
Date: Fri, 12 Jul 2019 21:39:04 -0700
Subject: [Kenwood] Need Mic holder for MC-50
In-Reply-To: <4b381558-a0df-2bad-d5dd-bb4724b7f4ac@gmail.com>
References: <4b381558-a0df-2bad-d5dd-bb4724b7f4ac@gmail.com>
Message-ID: <CA++_pmkp3Jkz_f++3Bt_wKu7QMqJn_zEbd=voPSeW_PhtT+PSg@mail.gmail.com>

Hello Ken,

I sell Kenwood hybrid parts for the DIY ham (and service hybrids, too).
I have a mic holder for the MC-50 from a harvested stand.
Please contact me off list.  Thanks!

Walter, kd7dny
walter.dilley at gmail.com or kd7dny.com



On Fri, Jul 12, 2019 at 11:01 AM Ken, W8EK <kenw8ek at gmail.com> wrote:

>
> I have a Kenwood MC-50 desk mic.  The mic works fine, and the PTT
> switches on the base are fine, but some one broke the black plastic
> "clip" that holds the microphone to the base.
>
> I know it is a long shot, but does anyone have one they would like to
> sell, or know where one can be obtained?  Any help would be very much
> appreciated.
>
> Thanks.
>
> 73,
>
> Ken, W8EK
>
> Ken Simpson
> E-mail to W8EK at FLHam.net or W8EK at arrl.net
> Voice Phone  (352) 732-8400
>
>
>
>
>
>
>
> .
>
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

From pa2a at xs4all.nl  Fri Jul 19 13:05:05 2019
From: pa2a at xs4all.nl (Steef PA2A)
Date: Fri, 19 Jul 2019 19:05:05 +0200
Subject: [Kenwood] microphone wiring Heil Proset for a TS590S
Message-ID: <69f8654a281d89eef7b8b0233189f731@xs4all.nl>

Hi,

I need to connect my Heil Proset to the TS590S. The Heil AD-1-K cable 
supplies no bias Voltage for the electret element while it works fine 
with an Elecraft K3. Are there schematics anywhere to supply the bias 
Voltage from the TS590S to the microphone?

73s Steef PA2A

From af5cc2 at gmail.com  Wed Jul 31 20:27:41 2019
From: af5cc2 at gmail.com (John Geiger)
Date: Wed, 31 Jul 2019 19:27:41 -0500
Subject: [Kenwood] FS: USB-63 CAT cable for TS570/870/480/2000
Message-ID: <CAHC1P2-4ragB+hyd+wdB5HH262LxVcimMf0c-jrhcFbu8Fq5OQ@mail.gmail.com>

 I have for sale a RT Systems USB-63 CAT cable with a USB jack on one end,
and a serial connection on the other. This works as a CAT cable for many
Kenwood rigs, including the TS480, TS570, TS2000, TS870 and probably a few
others.


This one is about 1 month old. These sell new for $31 plus shipping. I am
asking $25 shipped and can take paypal/check/MO.

73 John W5TD (ex AF5CC)