[Kenwood] Kenwood TS-950s & a L4B

[wg davis]

    Mrng. Guys,
           My half-Brother has a newer radio and has just put his L4B back
in service
 (since he gave my SB-201 back to me).. I was looking online and discovered
that
 using the L4B could cause 2 different problems; if U can believe what one
can
 read on the Web.. I told Floyd that one side of the Vox Relay connector
has 24 Vdc
 or more on it.. He has had this amp over 30 years and had never heard
this, discovered
 that is has Vdc after U take it off of Standby.. That is not good, in my
opinion.. The 2nd.
 thing is something about there being a delay from when the Transmitter is
keyed to
 when the L4B is keyed (my words/ term could be wrong).. Some people are
concerned
 about there being a ohms/ impedance mismatch for short period of time..
And some
 others are not concerned..
            Do U know where we could get 2 or 3 of the connectors that are
used at the
 Vox Relay connector; it is 2 straight pins..


-- 
73,  K4WGD