[Kenwood] Testing the TNC in a Kenwood TS2000

[Robert Bethman]

Thanks,

Pass it on to John!

I have not connected my TS-2000 to a computer other than to upgrade the firmware.

I happen to have the USB to DB-9 cable to allow such.

Regards, N0DGN

On 10/4/2017 2:44 PM, Rick WA6NHC wrote:
For systems that do not have Hyperterm anymore, you can download and use PUTTY for serial terminal comms (and more).

Rick nhc


On 10/4/2017 10:44 AM, Robert Bethman wrote:
Go to page 49 of the TS-2000 Manual.  It requires a computer to be attached through the DB-9 ( RS-232), connector.  You have to use Hyperterm or such from an older computer.  Newer Operating Systems do NOT have this!

Not all commands are available!

Regards,  N0DGN

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html