[Kenwood] TS-850SAT AND 60 METERS

[Paul Dluehosh]

Thanks!

73,
Paul -- N4PD

On 2/15/2017 9:49 PM, Jim Vaughan, K4TXJ wrote:
> The modification to allow the TS-850SAT to TX on 60 meters is on modsdk.
>
> You take off the top and bottowm covers and take out the two screws on the side at the top
> for the front panel and loosen the two screws on the side at the bottom of the front panel.
> Carefully tilt out the front panel and look at the board behind the front panel.  There is a row
> of diods in the center of that board.  Clip the lead on diode D11.
> Put everything back in reverse of the above.  You must reset the microprocessor before
> this mod will take effect.
>
> i was just on 5403.5 and it works great.  The internal tuner even tunes 60 meters.
>
> 73 and good luck,
>
> Jim, K4TXJ
> Louisville, Ky.
> email:    k4txj at arrl.net
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>