[Kenwood] Kenwood Accessories FS

[Ken, W8EK]

Kenwood Accessory Items For Sale:

Filters, External Speaker, Desk Mic, Dual Band Cross
Band FM Transceivers, Cables, Extension Feet, Etc.


Kenwood Crystal Filters:

Kenwood YK-88 SN 1 Crystal Filter:
This filter is 1800 Hz wide, for narrow SSB or wide CW/digital.
This is a "plug in filter" as opposed to the type that must
be soldered in. It is used in rigs such as the TS-450, TS-570,
TS-690, TS-850, TS-930, TS-940, TS-950, and others.
It is for the 8.83 MHz IF.
It works fine and looks like new.
Paperwork is included for $79.

Kenwood YK-88 S 1 Crystal Filter
This filter is 2400 Hz wide and is used in the same rigs as
listed above.
It works fine and looks like new.
Paperwork is included for $75.

Kenwood YK-88 SN
This is the "solder in" type filter that is used in the TS-130,
TS-430, TS-440, TS-530, TS-830, R-5000, and many others.
It is 1800 Hz wide making it ideal for narrow SSB, but also
for digital modes. It works fine and looks like new. $70


Kenwood SP-23 External Speaker:

The Kenwood SP-23 base speaker matches many Kenwood
transceivers including the TS-450S, TS-570S/D and TS-690.
This versatile 8 ohm speaker features a metal cabinet with
flip-out tilt bar. It has a 3 inch (77 mm) speaker element
rated to 1 watt, with a 300 to 5000 Hz response. The rear
panel features two screw connections, and includes a 3 foot
audio cable.

It is 4.8 x 3.75 x 9.25 inches, and weighs 2.8 lbs.

This particular speaker works fine, and looks like new. It
is in its original box, with cable and paper work for only
$75.


Kenwood MC-60 A, Deluxe Desk Microphone:

The Kenwood MC-60A is a communication type dynamic unidirectional
mic. It features UP-DOWN tuning. The mic impedance may be set for
50K ohms or 500 ohms. The frequency response is 150 Hz to 10 kHz
(-6dB) with the Preamp off and 200 Hz to 7 kHz (-6 dB) with the
Preamp on. The heavy zinc die-cast base provides extra stability.
The mic terminates to a standard round 8 pin mic plug. It can be
used on virtually any of the Kenwood rigs that use a round 8 pin
connector. Please note that the earlier MC-60 (non-"A") version
has a 4 pin mic plug and no UP-DOWN tuning.

This particular mic appears to be new, unused. It came from a SK,
so I can not verify for sure, but it certainly looks new, and of
course works like new.

This is a current model and sells for about $160. Buy this one
for only $100.


Kenwood MC-85 Deluxe Desk Microphone Parts:

The Kenwood MC-85 will take up to three mic cords,
i.e. it is capable of being used on three rigs.

MC-85 desk mic "Tech Special"
It looks like the silent key was working on repair of this when
he passed. All parts appear to be present, plus the addition
of a couple extra up/down switches. $45


Kenwood TM-732 Dual Band FM Cross Band Repeat Transceiver:

The Kenwood TM-732A dual band 2 meter, 440 MHz transceiver
provides high performance communications with operating ease.
It features dual receive including V+V and U+U, built-in CTCSS,
DTSS and page functions, 50 memory channels and multi-scan
functions. The high visibility front panel is detachable.
Extended receive range is 118-174 MHz and 438-450 MHz. Power
output is 50/10/5 watts on 2 meters and 35/10/5 watts on 440
MHz. Requires 13.8 VDC at 11.5 amps. MC-45DM multifunction
DTMF hand mic included.

Features:
50 Memories
Scanning
CTCSS Encode
S Meter Squelch
Auto Power Off
Cross Band Repeat
DTMF Memory
Triple Tone Alert
DTSS Pager Function
DTMF Hand Mic

This particular unit works 100% and looks like new.  No scratches.

With paper work for $200.


Kenwood TM-V7A, Dual Band FM Transceiver:

The Kenwood TM-V7A has an easy to operate control panel
and a cool-blue reversible LCD. It has DTSS and pager
functions, 280 memory channels plus the ability to receive
two frequencies on the same band. Other features include
S-meter squelch, time-out timer, dimmer, auto power-off
and supplied MC-53DM backlit DTMF mic. There is a 6 pin
mini DIN connector to facilitate 1200/9600 bps packet hook-up.

Features:
280 Memories
Dual Display
DTMF Hand Mic
Visual Scan
Dual Receive on same band
Auto Repeater Offset
Auto Simplex Checker
DTSS Selective Call
PL Decode/Encode
Packet 1200/9600 DIN
50/10/5 Watts RF Output

This unit works fine. It has so many features it is hard
to image them all. Cosmetically, the rigs looks great, but
it does have lines on the display, like most. A "display
repair kit" is included.

In its original box for $160.


Linear Amp Switching Cables for Kenwood Rigs:

This cable goes from a Kenwood transceiver to a linear
amplifier to switch the amp from transmit to receive.

One end has a DIN connector, as is used with most Kenwood
rigs. The other end has an RCA phono plug, as used by most
linear amplifiers.

Before using this cable, please check the switching
capabilities of your transceiver, and the requirements
of your amplifier.

Cable for switching the T/R relay. Only $15.

Cable as above, but with ALC line in addition to T/R switching.
$20


Kenwood "Extension Feet":
This is a set of two feet that are often used on
various Kenwood rigs to raise the front by about
1/2 inch to give a rig, speaker, remote VFO, etc.
the tilt that makes it easier to read.
This is a complete set of two front feet, with the
needed hardware. $15


Other Kenwood Items, such as manuals, are also available.


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400