From w3frg1 at gmail.com Thu Jun 16 09:35:20 2016 From: w3frg1 at gmail.com (Tom-W3FRG) Date: Thu, 16 Jun 2016 09:35:20 -0400 Subject: [Kenwood] Antenna Auto tune Connector Message-ID: This is the small rectangular OEM 6 pin connector (ELP-06V), female pins included, used for the Auto Tune Antenna function on the TS-50S, TS-480, TS-570, TS-590S/SG, TS-850S ACC4, TS-990S, TS-2000, TurboTuner, LDG K-OTT and many, many, more. Mating connectors (ELR-06V) and pins available for making cable extensions. Prices: 1 - 4 $6 each; 5 - 9 $5.50 each; 10 - 15 $4.50 each; 16 and up $4.00 each. *Free Domestic Shipping* Accept PayPal, MO, Cash or Personal Check. Contact Tom: w3frg1 at gmail dot com From kenw8ek at gmail.com Sat Jun 18 08:32:42 2016 From: kenw8ek at gmail.com (Ken, W8EK) Date: Sat, 18 Jun 2016 08:32:42 -0400 Subject: [Kenwood] Kenwood Accessories FS Message-ID: <35ae0156-3642-bef3-cd2d-8e94737cfd55@gmail.com> Kenwood Accessory Items For Sale: Filters, External Speaker, Desk Mic, Dual Band Cross Band FM Transceivers, Cables, Extension Feet, Etc. Kenwood Crystal Filters: Kenwood YK-88 SN 1 Crystal Filter: This filter is 1800 Hz wide, for narrow SSB or wide CW/digital. This is a "plug in filter" as opposed to the type that must be soldered in. It is used in rigs such as the TS-450, TS-570, TS-690, TS-850, TS-930, TS-940, TS-950, and others. It is for the 8.83 MHz IF. It works fine and looks like new. Paperwork is included for $79. Kenwood YK-88 S 1 Crystal Filter This filter is 2400 Hz wide and is used in the same rigs as listed above. It works fine and looks like new. Paperwork is included for $75. Kenwood YK-88 SN This is the "solder in" type filter that is used in the TS-130, TS-430, TS-440, TS-530, TS-830, R-5000, and many others. It is 1800 Hz wide making it ideal for narrow SSB, but also for digital modes. It works fine and looks like new. $70 Kenwood SP-23 External Speaker: The Kenwood SP-23 base speaker matches many Kenwood transceivers including the TS-450S, TS-570S/D and TS-690. This versatile 8 ohm speaker features a metal cabinet with flip-out tilt bar. It has a 3 inch (77 mm) speaker element rated to 1 watt, with a 300 to 5000 Hz response. The rear panel features two screw connections, and includes a 3 foot audio cable. It is 4.8 x 3.75 x 9.25 inches, and weighs 2.8 lbs. This particular speaker works fine, and looks like new. It is in its original box, with cable and paper work for only $75. Kenwood MC-60 A, Deluxe Desk Microphone: The Kenwood MC-60A is a communication type dynamic unidirectional mic. It features UP-DOWN tuning. The mic impedance may be set for 50K ohms or 500 ohms. The frequency response is 150 Hz to 10 kHz (-6dB) with the Preamp off and 200 Hz to 7 kHz (-6 dB) with the Preamp on. The heavy zinc die-cast base provides extra stability. The mic terminates to a standard round 8 pin mic plug. It can be used on virtually any of the Kenwood rigs that use a round 8 pin connector. Please note that the earlier MC-60 (non-"A") version has a 4 pin mic plug and no UP-DOWN tuning. This particular mic appears to be new, unused. It came from a SK, so I can not verify for sure, but it certainly looks new, and of course works like new. This is a current model and sells for about $160. Buy this one for only $100. Kenwood MC-85 Deluxe Desk Microphone Parts: The Kenwood MC-85 will take up to three mic cords, i.e. it is capable of being used on three rigs. MC-85 desk mic "Tech Special" It looks like the silent key was working on repair of this when he passed. All parts appear to be present, plus the addition of a couple extra up/down switches. $45 Kenwood TM-732 Dual Band FM Cross Band Repeat Transceiver: The Kenwood TM-732A dual band 2 meter, 440 MHz transceiver provides high performance communications with operating ease. It features dual receive including V+V and U+U, built-in CTCSS, DTSS and page functions, 50 memory channels and multi-scan functions. The high visibility front panel is detachable. Extended receive range is 118-174 MHz and 438-450 MHz. Power output is 50/10/5 watts on 2 meters and 35/10/5 watts on 440 MHz. Requires 13.8 VDC at 11.5 amps. MC-45DM multifunction DTMF hand mic included. Features: 50 Memories Scanning CTCSS Encode S Meter Squelch Auto Power Off Cross Band Repeat DTMF Memory Triple Tone Alert DTSS Pager Function DTMF Hand Mic This particular unit works 100% and looks like new. No scratches. With paper work for $200. Kenwood TM-V7A, Dual Band FM Transceiver: The Kenwood TM-V7A has an easy to operate control panel and a cool-blue reversible LCD. It has DTSS and pager functions, 280 memory channels plus the ability to receive two frequencies on the same band. Other features include S-meter squelch, time-out timer, dimmer, auto power-off and supplied MC-53DM backlit DTMF mic. There is a 6 pin mini DIN connector to facilitate 1200/9600 bps packet hook-up. Features: 280 Memories Dual Display DTMF Hand Mic Visual Scan Dual Receive on same band Auto Repeater Offset Auto Simplex Checker DTSS Selective Call PL Decode/Encode Packet 1200/9600 DIN 50/10/5 Watts RF Output This unit works fine. It has so many features it is hard to image them all. Cosmetically, the rigs looks great, but it does have lines on the display, like most. A "display repair kit" is included. In its original box for $160. Linear Amp Switching Cables for Kenwood Rigs: This cable goes from a Kenwood transceiver to a linear amplifier to switch the amp from transmit to receive. One end has a DIN connector, as is used with most Kenwood rigs. The other end has an RCA phono plug, as used by most linear amplifiers. Before using this cable, please check the switching capabilities of your transceiver, and the requirements of your amplifier. Cable for switching the T/R relay. Only $15. Cable as above, but with ALC line in addition to T/R switching. $20 Kenwood "Extension Feet": This is a set of two feet that are often used on various Kenwood rigs to raise the front by about 1/2 inch to give a rig, speaker, remote VFO, etc. the tilt that makes it easier to read. This is a complete set of two front feet, with the needed hardware. $15 Other Kenwood Items, such as manuals, are also available. I also have many other accessories available such as many different types of microphones, HTs, VHF and UHF rigs, HF and VHF/UHF antennas, connectors, miscellaneous accessories, etc. Just too many to list here. Please e-mail your requests. Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ken Simpson E-mail to W8EK at FLHam.net or W8EK at arrl.net Voice Phone (352) 732-8400 From n1rj at roadrunner.com Sat Jun 25 12:22:38 2016 From: n1rj at roadrunner.com (Roger D Johnson) Date: Sat, 25 Jun 2016 12:22:38 -0400 Subject: [Kenwood] DIN cable wanted Message-ID: <576EAFCE.9050001@roadrunner.com> Looking for a E30-3047-05 cable. This is the 6 pin DIN cable that connects xcvr to IF-232 box. 73, Roger