[Kenwood] TS-450s problem...correction...

[Steve Waters]

Ken,

I sent you a post off list but will reply here also. I had a problem with
mine and one other with a bad solder joint where the antenna attaches to
the PC board. Repaired solder joint on both and resolved the problem.

Steve
AE4IN
On Jan 29, 2016 4:50 PM, "frank" <frank at k5dkz.com> wrote:

> Does that radio have a squelch?
>
> On Fri, 29 Jan 2016 13:33:06 -0800
> "Kenneth G. Gordon" <kgordon2006 at frontier.com> wrote:
>
> > My friend just sent me the following information on the TS-450S problem.
> >
> > "It stops receiving on all bands. I have no effect or way to clear it.
> It is only
> > momentarily like 5 to 30 seconds.  I have tapped on the case I have
> clicked
> > or keyed the  mic and I see no results."
> >
> > Suggestions?
> >
> > Ken W7EKB
> > ______________________________________________________________
> > Kenwood mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/kenwood
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Kenwood at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>
> --
> 73,  Frank
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>