[Kenwood] TS-430S Xverter Connector.

[Joe]

yup!
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 9/4/2015 7:25 PM, manualman at juno.com wrote:
> There are 8 pin DIN's and then there are Kenwood 8 pin DIN's. The pin
> spread (in degrees) is different for Kenwood  8 pin DIN's.
> See: http://www.universal-radio.com/catalog/parts/dinconn.html
> Scroll down to the 8 pin.
>
> Pete, wa2cwa
>
> On Fri, 4 Sep 2015 17:06:30 -0500 Joe <nss at mwt.net> writes:
>> Question,
>> Is that 8 pin connector for the transverter jack a like proprietary
>>
>> Kenwood plug?
>>
>> I bought an 8 pin one from digikey, and it arrived today,
>>
>> I tried to push it in just to test it out and when completely
>> assembled
>> it just won't go in. So I looked closely and the pinout pattern
>> looks
>> good the like keyway thing is also in the right place.
>>
>> So I took it apart and tried just the pins part and no go it appears
>> the
>> pins are too big to fit into the holes.
>> Anyone know if this is a special kenwood plug? Or why this won't go
>> in?
>>
>> Joe WB9SBD
>
>
>