[Kenwood] TS-430S Xverter Connector.

[Roger Shultz]

And if you don't know better and force it in then you get to remember that mistake by having to replace the jack on the radio. It's obvious how I know this!

73, Roger, NJ1R

Sent from my iPhone

> On Sep 4, 2015, at 8:25 PM, <manualman at juno.com> <manualman at juno.com> wrote:
> 
> There are 8 pin DIN's and then there are Kenwood 8 pin DIN's. The pin
> spread (in degrees) is different for Kenwood  8 pin DIN's.
> See: http://www.universal-radio.com/catalog/parts/dinconn.html
> Scroll down to the 8 pin.
> 
> Pete, wa2cwa
> 
> On Fri, 4 Sep 2015 17:06:30 -0500 Joe <nss at mwt.net> writes:
>> Question,
>> Is that 8 pin connector for the transverter jack a like proprietary 
>> 
>> Kenwood plug?
>> 
>> I bought an 8 pin one from digikey, and it arrived today,
>> 
>> I tried to push it in just to test it out and when completely 
>> assembled 
>> it just won't go in. So I looked closely and the pinout pattern 
>> looks 
>> good the like keyway thing is also in the right place.
>> 
>> So I took it apart and tried just the pins part and no go it appears 
>> the 
>> pins are too big to fit into the holes.
>> Anyone know if this is a special kenwood plug? Or why this won't go 
>> in?
>> 
>> Joe WB9SBD
> 
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html