[Kenwood] The TS-2000 and the SignaLink USB

[rbethman]

Go to page 13 of the owners manual.

Plug the external speaker into either of the jacks marked # 11. They are 
the external speaker jacks.

Regards, N0DGN

On 11/2/2015 11:59 AM, Tim Billingsley wrote:
> I acquired a TS-2000 back severeal months ago and with doctors,
> hospitals, chemo, and radiation and more hospitals I have piddled with
> get audio out of the TS-2000 two or three times. No luck.
>
> It was simply plug and play on the TS-570S. I am curious if htere is
> some special setting or mode necessary to get audio out of the ACC2
> plug on the TS2K.
>
> Is there some magic to making this happen on the TS2K?
>
> My setup is the TS2K, SL USB, SLMOD13K, & SLCAB13K
> I can connect the SL USB to the TS-570 and everything works great, but
> when connected to the TS2K I get NADA....No sign of receive audio from
> the TS2K at all.
>
> Any wisdom or ideas??
>
> Thanks for any help any of you can offer
>
> Tim KD5CKP
>
> P. S, I have yet to get the internal TNC to work either. Maybe the two
> are related.