[Kenwood] Kenwood Power Supply, Microphones, misc accessories FS

Wed May 20 13:45:53 EDT 2015

Kenwood Items For Sale:

heavy duty power supply, Cables, Microphones, HT accessories,
original boxes and manuals, and more

Kenwood PS-30 power supply

This 20 amp 13 V DC supply was originally made to go with the
Kenwood TS-120/130 series of transceivers, but it also matches
the TS-430/440, and is actually a much more rugged power supply
than the PS-430 often used with the TS-430 or TS-440. It features
large heat sinks and automatic overload reset. Ripple voltage is
less than 20 mW at 13.8VDC 20 A.

The PS-30 has a heavy duty power cord with the standard 6 pin
molex connector as used by many Kenwood, Icom and some Yaesu rigs.
It also has terminals on the back for lower current output, such
as for a 2 meter or dual band rig.

This one works fine and looks good as well.  It includes paper
work for $125.

Linear Amp Switching Cable for Kenwood Rigs:

This cable goes from a Kenwood transceiver to a linear
amplifier to switch the amp from transmit to receive.

One end has a DIN connector, as is used with most Kenwood
rigs. The other end has an RCA phono plug, as used by most
linear amplifiers.

Before using this cable, please check the switching
capabilities of your transceiver, and the requirements
of your amplifier.

This cable is for switching the relay. $15

Hand Microphone with round 8 pin plug for Kenwood, Alinco, etc.

This hand mic works great on most Kenwood rigs with the
round 8 pin connector, such as the TS-430, TS-440, TM-241,
TM-2530, TW-4000, and others, including Alinco and ADI.
It says "Electret Condenser Mic" on the back, and
"Kenwood" on the front, with no model number.

Basically, this mic functions like an MC-43, with a couple
more features. It has the mic and PTT switch; it also has
up/down switches on the top. There are four "extra" buttons
labeled Call, VFO, MR, and PF. What these four buttons do
depends on the rig. There is also a "Lock" switch on the back.

Regardless if you use the four extra buttons or not, you
still have a mic that works like an MC-43.

This mic works fine, and looks like new. I am guessing it
came with a rig, and was immediately put in the drawer,
and never used. $30

Kenwood MC-43 hand microphone

The MC-43 is the "standard" hand mic used on most of the Kenwood
rigs that use a round 8 pin connector.  This includes the TS-430,
TS-440, TS-450, TS-930, TS-940, and other HF rigs, plus VHF and
dual band rigs such as the TW-4000, TW-4100, TM-2530, TM-733,
TM-241, TM-441, and many others. It has up and down switches on
the top, and a PTT switch on the side.

This one works 100% and looks very nice.  $35

Kenwood MC-59 "Potato Head" DTMF Touch Tone Mic
This DTMF mic has a 16 digit DTMF pad, and a modular "LAN"
connector. Info at
http://www.universal-radio.com/catalog/fm_txvrs/21270071.html
This one appears new, still in its plastic bag. $40

Kenwood MC-44 DM, DTMF Touch Tone Mic
Used on many Kenwood rigs with round 8 pin mic plug.
Includes up/down switches, and lock switch, along with
the 16 digit DTMF pad. Excellent condition. $40

Kenwood "Soft Case" for HTs:

SC-35 soft case
For Kenwood TH-78 dual band HT. Looks like new.
Only $12.

SC-8 T soft case
For Kenwood TH-21, TH-31, TH-41 series HTs.
Like new condition. $10

Original Boxes for Kenwood VHF / UHF Rigs:

The following original boxes for Kenwood equipment
are available.  They are all in very nice condition,
and include the molded styrofoam inserts to protect
the rig, plus the box itself.

Original Box for Kenwood TM-221 two meter transceiver
It is in very nice condition, and includes the molded styrofoam
inserts to protect the rig, plus the box itself. $6

Original Box for TH-41, 440 MHz HT
Complete with insert. Looks like new. $8

Original box for Kenwood TR-2600, Two meter HT
Complete with insert. Looks like new. $8

Original box for TenTec 2591, Two meter HT
Complete with insert. Looks like new. $8

Accessories for the Kenwood TH-21 / 31 / 41 series HTs:

Antenna adapter that fits the TH-21 series HTs, and has
an SO-239 on the other end, to accept a PL-259. $5

Antenna adapter that fits the TH-21 series HTs, and has
a BNC on the other end. $8

Kenwood SC-8 T "Soft Case" for any of the TH-21 series HTs
In bag, with original paper work.  May be new. $10

Original Operating manual for TH-21 HT for 2 meters $8

Kenwood W09-0315 charger
This charger is used to charge the larger PB-21 H batteries
for the TH-21 series, and also on other Kenwood radios.
It has a standard 2.1 mm coaxial connector. $12

Antennas for your HT:

All rubber ducks are for 2 meters, are in good
condition, and are $10 each, unless stated otherwise.

BNC - As used on most HTs, 7 inches long

BNC - Original Alinco EA0024, about 4 inches long

BNC - Original from Kenwood TH-215, about 5 inches long

BNC - "Stubby" about 4 1/2 inches long

Type F connector - 6.5 inches long

Threaded (as used by Motorola, etc.) - about 7 inches long

BNC Stubby for 440 MHz, 3 inches long

Threaded (as used by Motorola, etc.) stubby for 440 MHz

Not a Rubber Duck, but can be used on your HT:
Telescoping Antenna w/ BNC about 19 inches long
can be used as a quarter wave antenna on 2 m,
or on 220, or 450 MHz if telescoped shorter. $12

Original Manuals for Kenwood equipment:

All manuals are in very nice condition, for Kenwood equipment.
All are Operating manuals unless otherwise specified.
All are original manuals only.

SPECIAL:
Buy two, three, or four of my books/manuals, and take 10% off.
Buy five or more and take 20% off.

TH-21 HT for 2 m, $8
TH-215/315/415 HT for 2 m, 220 MHz, or 440 MHz, $10
TH-225, 2 m HT, $12
TH-235, 2 m HT, $15
TH-241/441/541 mobile FM transceivers
...For 2 m, 440 MHz, & 1200 MHz, $12
TM-221/421 2 m or 440 MHz mobile, $12
TM-261/461 2m or 440 MHz mobile, $12
TM-2570/2550/2530 2 m mobile, $15
TR-2400, 2 m HT, $12
Service manual for TR-2600, 2 m HT, $12
TR-9000, 2 m multimode, $12
TS-120 S/V, HF xcvr, $20
TW-4000 dual band mobile, $15
Service manual for TW-4000 dual bander $20
TW-4100 dual band mobile, $15

BC-5 DC to DC quick charger $2
LF-30A Low Pass Filter $5
MC-30 & MC-35 hand microphones $4
MS-1 mobile stand $3
PB-1, PB-2, PB-3, & PB-4 battery packs $3
PB-24 battery pack for TR-2400 $2
PB-25 H battery pack for TR-2500 $2
PS-6 power supply $5
PS-30 power supply $4
SMC-24 speaker mic $3
SMC-25 speaker mic $3
SP-430 speaker $2
SP-820 Speaker $2

These are original Kenwood manuals only.

Versión en español de Kenwood TM G-707 manual de Venta:

Versión en español del Manual de Operación
para el Kenwood TM G-707 transmisor-receptor de banda dual

Este es el manual de instrucciones original, en español.
Parece que es bastante extensa y detallada.
Es básicamente nuevo, sólo se abre para observar que
es sólo en español. Es original de Kenwood.

$ 8 más gastos de envío de la Florida.

Spanish Version of Kenwood TM G-707 manual:

Spanish version of the Operating Manual
for the Kenwood TM G-707 dual band transceiver

This is the original operating manual only, in Spanish.
It looks like it is quite extensive and detailed.
It is basically new, only being opened to observe that
it is in Spanish only. It is original from Kenwood. $8

I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400