[Kenwood] Lightning protection wire antennas WA8OPR

[k7bvo at cox.net]

Right.....    (done in my best Bill Cosby voice imitation)  roflmao

Bill
K7BVO


---- Pete Lascell <plascell at verizon.net> wrote: 
> If a lightning bolt can travel thousands of feet down to ground thru open 
> air, do you think 2.5 inches will slow it down?
> 
> 
> ----- Original Message ----- 
> From: "Terry Clinard" <tclinard at hotmail.com>
> To: <kenwood at mailman.qth.net>
> Sent: Wednesday, May 14, 2014 11:25 AM
> Subject: [Kenwood] Lightning protection wire antennas WA8OPR
> 
> 
> > Can someone answer this question:
> >
> >
> >
> > I have two 170 foot end feed wires in service for the bands.  Both are up 
> > at the top of tree line about 55 foot up.
> >
> >
> >
> > Decided to purchase two old style heavy duty knife switches with porcelain 
> > bases.  The gap between the heavy duty copper contacts is a bout 2.5 
> > inches.
> >
> >
> >
> > The live end of the antenna wire is attached to the center knife rocker 
> > and one of the side psots is connected to the transceiver.  Obviously when 
> > the knife switch is opened it disconnects the antenna.  My question is 
> > should the opposite knife post be attached to an earth ground? This then 
> > puts the wire in the air directly to ground.  Now with the antenna going 
> > to true ground raises the negative potential of the wire in the air.  I am 
> > thinking that one does not want to do this, because now you have created a 
> > high (55 foot) negative conductive path for lightning to target.  Should 
> > the antenna be grounded or simply turned off with the 2.5" knife switch 
> > air gap?
> >
> >
> >
> > Thanks Terry WA8OPR
> >
> > ______________________________________________________________
> > Kenwood mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/kenwood
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Kenwood at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html