[Kenwood] HF Rigs, VFO, Mics and much more FS

[Ken Simpson, W8EK]

Kenwood Items For Sale:

HF Transceivers, Crystal Filer, Microphones, Original
Boxes, HT Accessories, Original Manuals, and more


Kenwood TS-450 S AT, HF Transceiver:

The Kenwood TS-450S AT covers 160 through 10 meters including
the WARC bands with 100 watts output (40W AM). It supports
many advanced features such as keypad entry, VOX, 100 memories,
XIT, RIT, Notch, IF Shift, Squelch and digital meter. It includes
the AT-450 antenna tuner factory installed. It requires 13.8 VDC
at 20.5 amps.

Features:
160-10 meters
AF Notch
CW Reverse
100 Memories
Dual Mode NB
XIT/RIT
IF Shift
Keypad Entry
All Mode Squelch
RF Speech Processor

This is a modern sophisticated HF rig, with just about every
feature you would want.

This particular unit works 100% and looks very close to new.
I do not find a scratch on it.

Paper work is included for $550.


Kenwood YK-88 SN-1, 1800 Hz narrow SSB / wide CW filter $85


Buy both the TS-450 and YK-88 filter (above) for $625.



Kenwood TS-120 S, 80 thru 10 meter HF Transceiver:

The Kenwood TS-120S is designed for SSB and CW modes in the
80 through 10 meter ham bands plus WWV 15 MHz receive. All
solid-state with 200 PEP input on SSB, 160W DC on CW (160
and 140W on 10 m). The TS-120S features a 100 Hz digital
display with analog subdial.

Requires 13.8 VDC at 18 amps. 9.6 x 3.8 x 11.7 inches 12.3 lbs

Features:
80-10 meters
25 kHz Marker Calibrator
NB
RIT
IF Shift
RF Attenuator

This one works fine, and looks good, but not mint.  With a 30
year old radio, you can not expect much more!

Paper work included for $235.


VFO-120 remote VFO for TS-120/TS-130

The Kenwood VFO-120 allows the operator to operate split
frequencies when chasing DX, net monitoring and finding a
clear frequency while holding the original frequency. The
VFO-120 features a T.F. SET switch which prevents transmitting
on the frequency during split-frequency operation and allows
quick setting of the transmit frequency. LED indicators show
VFO functions at a glance. Power is derived from the TS-120S.

This one works fine.  It has a few minor scratches, but the
face plate looks very nice.

With the connecting cable and paper work for $100.


Buy both the TS-120 and VFO-120 together for $325.



Kenwood MC-60 A Deluxe Desk Microphone:

The Kenwood MC-60A has been a popular desk mic among Kenwood owners 
for many years. It has a communication type dynamic unidirectional 
moving coil type mic element and features UP-DOWN tuning (on 
compatible Kenwood transceivers) plus a built-in pre-amp. There is a 
switch for PTT (push to talk) and also a lock feature. The mic 
impedance may be set for 50K ohms or 500 ohms. The frequency response 
is 150 Hz to 10 kHz (-6dB) with the Preamp off and 200 Hz to 7 kHz (-6 
dB) with the Preamp on.

The heavy zinc die-cast base provides extra stability. The mic 
terminates to a standard 8 pin mic plug. The preamp requires two AA 
cells which are mounted through the bottom of the base. Please note 
that the earlier MC-60 (non-"A") version featured a 4 pin mic plug and 
did not have UP-DOWN tuning.

This one works 100% and looks very close to new.

With paper work for $100.


Kenwood MC-50 dual impedance desk Microphone:

The Kenwood MC-50 is a dynamic desk microphone. It features
a push-to-talk and lock button. This mic has connector
switched, dual impedance ratings of 50k ohm and 600k ohm.
Frequency response is from 150 Hz to 10 kHz (-6 dB).

The MC-50 is the perfect match for many of classic Kenwood
transceivers such as TS-120S, TS-520S, TS-530S, TS-830S,
but can be used on almost any rig.

This one works 100% and looks close to new.
With paper work for $60.


Hand Microphone with round 8 pin plug for Kenwood, Alinco, etc.

This hand mic works great on most Kenwood rigs with the
round 8 pin connector, such as the TS-430, TS-440, TM-241,
TM-2530, TW-4000, and others, including Alinco and ADI.
It says "Electret Condenser Mic" on the back, and
"Kenwood" on the front, with no model number.

Basically, this mic functions like an MC-43, with a couple
more features. It has the mic and PTT switch; it also has
up/down switches on the top. There are four "extra" buttons
labeled Call, VFO, MR, and PF. What these four buttons do
depends on the rig. There is also a "Lock" switch on the back.

Regardless if you use the four extra buttons or not, you
still have a mic that works like an MC-43.

This mic works fine, and looks like new. I am guessing it
came with a rig, and was immediately put in the drawer,
and never used. $30


Original Boxes for Kenwood VHF / UHF Rigs:

The following original boxes for Kenwood equipment
are available.  They are all in very nice condition,
and include the molded styrofoam inserts to protect
the rig, plus the box itself.

Kenwood TW-4000 dual band transceiver $7

Kenwood TM-221 two meter transceiver $5


Accessories for the Kenwood TH-21 / 31 / 41 series HTs:

Antenna adapter that fits the TH-21 series HTs, and has
an SO-239 on the other end, to accept a PL-259. $5

Antenna adapter that fits the TH-21 series HTs, and has
a BNC on the other end. $8

Kenwood SC-8 T "Soft Case" for any of the TH-21 series HTs
great condition $12

Original Operating manual for TH-21 HT for 2 meters $8

Kenwood W09-0315 charger
This charger is used to charge the larger PB-21 H batteries
for the TH-21 series, and also on other Kenwood radios.
It has a standard 2.1 mm coaxial connector. $12


HT Belt Clips and Wrist Straps:

Belt Clips:
All include the hardware with the belt clip and are $6 each.
Icom IC-2 AT
Motorola
Yaesu FT-207
Yaesu FT-209

Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, TR-2500, etc.
Kenwood TR-2400
Yaesu FT-209


Original Manuals for Kenwood equipment:

All manuals are in very nice condition, for Kenwood equipment.
All are Operating manuals unless otherwise specified.
All are original manuals only.

SPECIAL:
Buy two, three, or four of my books/manuals, and take 10% off.
Buy five or more and take 20% off.

TH-21 HT for 2 m, $8
TH-215/315/415 HT for 2 m, 220 MHz, or 440 MHz, $10
TH-225, 2 m HT, $12
TH-235, 2 m HT, $15
TH-241/441/541 mobile FM transceivers
...For 2 m, 440 MHz, & 1200 MHz, $12
TM-221/421 2 m or 440 MHz mobile, $12
TM-261/461 2m or 440 MHz mobile, $12
TM-2570/2550/2530 2 m mobile, $15
TR-2400, 2 m HT, $12
Service manual for TR-2600, 2 m HT, $12
TR-9000, 2 m multimode, $12
TS-120 S/V, HF xcvr, $20
TW-4000 dual bander mobile, $15
Service manual for TW-4000 dual bander $20
TW-4100 dual band mobile, $15

BC-5 DC to DC quick charger $2
LF-30A Low Pass Filter $5
MC-30 & MC-35 hand microphones $4
MC-85 desk microphone $4
MS-1 mobile stand $3
PB-1, PB-2, PB-3, & PB-4 battery packs $3
PB-24 battery pack for TR-2400 $2
PB-25 H battery pack for TR-2500 $2
PS-6 power supply $5
PS-30 power supply $4
SMC-24 speaker mic $3
SMC-25 speaker mic $3
SP-430 speaker $2
SP-820 Speaker $2

These are original Kenwood manuals only.


Versión en español de Kenwood TM G-707 manual de Venta:

Versión en español del Manual de Operación
para el Kenwood TM G-707 transmisor-receptor de banda dual

Este es el manual de instrucciones original, en español.
Parece que es bastante extensa y detallada.
Es básicamente nuevo, sólo se abre para observar que
es sólo en español. Es original de Kenwood.

$ 8 más gastos de envío de la Florida.

Spanish Version of Kenwood TM G-707 manual:

Spanish version of the Operating Manual
for the Kenwood TM G-707 dual band transceiver

This is the original operating manual only, in Spanish.
It looks like it is quite extensive and detailed.
It is basically new, only being opened to observe that
it is in Spanish only. It is original from Kenwood. $8


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400