[Kenwood] keying leads out of TS-430S

[Dan Violette]

Use remote connector (7-pin DIN).  Amp needs to be low current on the TS-430
relay (I forget 20mA?? max) or you might need a relay.  ALC input from amp
also on this connector.  Same connector used by the TS-440, and TS-850 and
others in case you want to get a pre-built one.  Only difference being the
TS-430 does not have 12v on key on pin 7 (TS-430 has no contact).  This is
nice to have if you need an external relay for the amp.  Manual at Kenwood
(large file)
http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Communications/AMA/Man
uals/TS-430.pdf and other places with a "TS-430 manual" search on Google.  I
believe a search for "TS-430 Amp Control" or similar will probably give all
the where-for-all.

Dan, KI6X

-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of rbig
Sent: Saturday, May 11, 2013 10:29 AM
To: kenwood
Subject: [Kenwood] keying leads out of TS-430S




I have a TS-430S in a location away from where I am (and manual with it).  

I haven't used it with a final amp.   Now, I want to do so.

For keying leads----where do they come out, and is the connector easily
obtainable?
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html