[Kenwood] AT-940 tuner

[Clif Holland]

CN4 on the B3 unit connects to CN9 on the A3 unit
CN5 to CN12
Pg 99 of the service manual
Those cables should have been on the AT940.

Clif Holland KA5IPF
www.avvid.com




----- Original Message ----- 
From: "JT Timmons" <jetimmons at frontier.com>
To: <kenwood at mailman.qth.net>
Sent: Tuesday, April 09, 2013 6:10 PM
Subject: [Kenwood] AT-940 tuner


>I have just installed the AT-940 in my ts-940s .....I have all the wires in 
>the right place but it does not work.....what I would like to know: is 
>their a number 4 and 5 connector that should be hooked up and if so where 
>might they be located in the radio.....the manual shows a number 4 & 5 
>connector hooked to
> the at-940 unit......Thank You....JT..... N9OJC
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html