[Kenwood] TS-130S

[David C. Hallam]

Is there an idiot proof method to disable the transmit function while 
testing sensitivity?  I don't want to fry the attenuator in my HP signal 
generator.  I know a couple of people who have while testing transceivers.

David
KW4DH

On 4/3/2013 1:06 PM, Clif Holland wrote:
> Check the sensitivity first, it may be correct.
>
> Open the service manual and it shows the IF unit under the bottom cover.
>
> Clif Holland KA5IPF
> www.avvid.com
>
>
>
>
> ----- Original Message ----- From: "David C. Hallam" 
> <dhallam at knology.net>
> To: <Kenwood at mailman.qth.net>
> Sent: Wednesday, April 03, 2013 11:56 AM
> Subject: [Kenwood] TS-130S
>
>
> I need to adjust the S meter on my TS-130S. It moves only on very strong
> signals. Before I start doing anything, I would like to know how
> accessible is the IF board. I have the service manual and equipment to
> do the job, but if it requires a major disassembling effort to get to
> the adjustment points, I will just live with it as is.
>
> David
> KW4DH
>

-- 
“One of the evils of democracy is, that you have to put up with the man you elect whether you want him or not.”  Will Rogers