[Kenwood] Fw: th-k2

[Somers Jr, Kenneth]

Hi.

If the case to the thk2 is plastic, (I do not recognize the model
number) there are some solvents out there that will melt and fuse 
the tic pieces together. I have repaired my Alinco DJ-580 case, 
I used a pair of pointy tweezers to pick up a drop of REZENBOND 
out of the bottle and put it into the crack in the case, the 
plastic melted and fused together, and with the help of a couple 
rubber bands to hold the case together until the liquid evaporated 
(about an hour) the case was fine, just as solid as it was before 
it cracked.  but you have to be very careful with the this liquid 
on clear plastic as to much liquid will screw up the clearness of 
the plastic. There are some plastics that this solvent will not 
dissolve, but for the high impact plastic walkie-talkie cases this 
stuff is great. 

it can be found at any store that sells Plexiglas  or lexan comes
in bottles as small as two ounces.  there are several different 
brand names out there.  

good luck

73's

Sandy  WA2JVK

Thank You:
 
Kenneth J Somers Jr.
Senior Test Engineer
Maplewood Testing Lab
Maplewood, New Jersey   07040
  1-973-761-1820
-----Original Message-----
From: kenwood-bounces at mailman.qth.net [mailto:kenwood-bounces at mailman.qth.net] On Behalf Of wa8gfo
Sent: Wednesday, January 18, 2012 2:23 PM
To: Kenwood
Subject: [Kenwood] Fw: th-k2




> The front case on my thk2 fm transceiver has
> a crack in the front, wondering if someone would
> happen to have one that doesn't work that the
> front housing cover is good.
> Thanks
> Ron wa8gfo
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----------------------------------------
The information contained in this e-mail, including any
attachment(s), is intended solely for use by the named
addressee(s).  If you are not the intended recipient, or a person
designated as responsible for delivering such messages to the
intended recipient, you are not authorized to disclose, copy,
distribute or retain this message, in whole or in part, without
written authorization from PSEG.  This e-mail may contain
proprietary, confidential or privileged information. If you have
received this message in error, please notify the sender
immediately. This notice is included in all e-mail messages leaving
PSEG.  Thank you for your cooperation.