[Kenwood] Unplugging pin connectors

[John E. Cleeve]

Hello Peter,

	That was bad advice....those connectors have crimped connections and
you are likely to pull the wires from the individual connector pins/sockets.
I extracted the connectors by gripping the plastic body of the connector
using a pair of long nosed pliers that have serrations machined into the jaw
mating surfaces.

73, John. G3JVC/GM3JVC

-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Peter Ravn
Sent: 10 January 2012 16:39
To: Kenwood at mailman.qth.net
Subject: [Kenwood] Unplugging pin connectors

How to unplug the white pin connectors Kenwood uses in their TS850 and
and TS950? I was told to grab all wires and gently rock and pull at the same
time, but the connector doesn't move at all, so apparently there is a lock
to be unleashed?

73 de OZ8CTH, Peter
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus Database: 2109/4734 - Release Date: 01/10/12