[Kenwood] Kenwood TS-570SG

[Clif Holland]

Since they use the same board for the "D" and "S" models it's probably 
jumpered for a "D" model.

Look at the PN, It should be X59-3690-13, if it's a -12 it's for the "D" 
model. Just ask Kenwood for the correct jumpering.

Clif Holland KA5IPF
www.avvid.com




----- Original Message ----- 
From: "W9RPM" <john at w9rpm.com>
To: "kenwood" <kenwood at mailman.qth.net>
Sent: Sunday, January 08, 2012 12:49 PM
Subject: [Kenwood] Kenwood TS-570SG


> Hi, The Control Board on my TS-570SG went bad. I ordered a new one, and
> it came, and the radio now functions. I have lost my 6 meters though. I
> have done a full reset, and still no 6 meters. The new board is the
> exact same Part Number as the old one. The only difference on the new
> board is that I see that an IC chip on the new board says Kenwood
> JYKA1997, and the on the old board says Kenwood JSHA1997. Could this
> difference be why I know longer have 6 meters? And if so, should I
> replace the chip in the new board with the one from the old one? Thanks
> for your help. 73 John W9RPM
>
> -- 
> EMAIL: john at w9rpm.com
> WEBPAGE: http://www.w9rpm.com/
> Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
> DX and CONTEST CLUB: http://www.w9idx.com/
> La Crosse Hams: http://www.lacrossehams.org/
> AOL IM: W9RPM
> YAHOO: W9RPM
>
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html