[Kenwood] Kenwood 950sdx and the IF-232C with DXLabs Commander

[rwholst at gmail.com]

BINGO!!!

Prefect, now it is up and running.

73 & Many thanks!
K2RWH
Rich

-----Original Message-----
From: Darrell Drake [mailto:va3dg at rogers.com] 
Sent: Saturday, January 07, 2012 12:45 AM
To: Richard W. Holst; Kenwood at mailman.qth.net
Subject: Re: [Kenwood] Kenwood 950sdx and the IF-232C with DXLabs Commander

Hello Rich....

My Knwd TS-950SDX is controlled by Commander via an IF-232 using the following parameters:

Com   1
Baud  4800
Word  8
Parity None
Stop   2
DTR  On
RTS   On

Cheers & GL

Darrell,
VA3DG/VE3DDG


-----Original Message-----
From: rwholst at gmail.com
Sent: Friday, January 06, 2012 7:36 PM
To: Kenwood at mailman.qth.net
Subject: [Kenwood] Kenwood 950sdx and the IF-232C with DXLabs Commander

I'm just reaching out to the Kenwood community to see if anyone else has successfully configures their Kenwood Rig to be controlled by the DXLabs Commander software through the Kenwood IF-232C hardware?

It worked for me years ago but since I moved I do not remember what all the comm port setting should be and I am not 100% sure it works with the DXLabs software?

Any help would be appreciated!

Tnx and 73,
K2RWH,
Rich
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html