[Kenwood] Many Kenwood Items FS

[Ken Simpson, W8EK]

DC Power Cable, Desk Microphones, DTMF Touch Tone Microphones,
HT Speaker Mics, Accessories for Kenwood HTs, original Kenwood
Manuals, Wattmeter, Low Pass TVI Filters, and other Kenwood
items For Sale:


DC Power Cable for Kenwood TS-520 HF Transceiver:

I have a cable about five feet long with red and black leads
that goes to a 12 pin Jones connector (3 rows of 4 female
slots). I think this is for a Kenwood TS-520, but please
check the connections before plugging it in.

This cable looks good, but I have no TS-520 to test it on.
$15


Deluxe Desk Microphone w/ Kenwood 8 pin connector:

KLM / Fuji FDM-148 Deluxe Gooseneck Microphone

This is a 600 ohm impedance desk microphone that KLM sold
for the KLM Multi 2700 and other transceivers. It was made
by Fuji and relabeled by KLM and others. It has a flexible
gooseneck, about 10 inches long. Being it is low impedance,
it is compatible with most modern rigs.

This particular mic works great and has had the connector
changed to a round 8 pin connector, wired for Kenwood. It
is in its original box, with original paper work. $75


Another Deluxe Desk Microphone:

This is a great looking and great performing low impedance
desk mic. It has a quality Shure 600 ohm cartridge in it
(the cartridge alone is over $40 new), with a very nice
black die case base and neck, with a chrome grill. It
looks somewhat like a Shure 444, but no plastic on this
one -- all metal!

This one looks like new, and works the same. It has a
long (approx 6 foot) cord, with a round 8 pin connector
for Kenwood. $75


Astatic Model 810-6 Gooseneck Microphone:

This mic is on a 12 inch gooseneck. The mic is a brushed
metal about 5 1/4 inches long, and is actually part of the
gooseneck. The cable goes thru the gooseneck. This has a
2 conductor shielded cable, so it is a quality balanced
microphone with about a 4000 ohm impedance. The gooseneck
terminates in a standard 5/8 inch threaded connector.

This one works fine and looks good. $45


DTMF Touch Tone Microphones:

CES 610 L DTMF Touch Tone Mic
Can manually dial a number, or automatically store it in
the mic, and "speed dial". 12 digit touch tone pad on the
front. 8 pin modular plug (like computer LAN).
Looks to be new. $38

KDK DM TT-1 DTMF Touch Tone Mic
This mic has a 12 digit touch tone pad on it, with a
switch to turn the pad on and off. With 4 pin plug.
It works fine, and looks great. $35

KDK Model TM-2 DTMF Mic
With touch tone pad and up-down switches. It presently
has a round 8 pin connector wired for Kenwood.
Nice condition. $40

Johnson 250-0761-010 / CES 655 L DTMF Mic
It has a 12 digit pad on the front, and is a rugged mic.
Presently with 4 pin plug. Looks to be unused. $38


Several HT Speaker Microphones:

MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15

Speaker-mic for Yaesu (Vertex) VX-6 / VX-7 / VX-8
This speaker mic has a 4 conductor 3.5 mm connector,
with the threads as used by the VX-6 / VX-7/ VX-8.
Looks to be unused. $15

Azden SDX-316 Speaker Microphone
Although it has an Azden name plate, it will also work
with Icom, some Yaesu, and Alinco that need 3.5 mm and
2.5 mm plugs.
This is the rounder style speaker mic that fits nicely in
the palm of your hand. $18


Accessories for Kenwood TH-205, TH-215, TH-225, TH-415,
and other HTs in this series:

Original Kenwood Rubber Duck antenna from TH-215. $10

Kenwood BC-2 Charger for PB-2 batteries. $12

MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15

Kenwood Wrist Strap for TH-215, plus many other HTs. $4

BNC to PL-259 antenna adapter $5


Accessories for the Kenwood TH-21 / 31 / 41 series HTs:

Original Operating manual for TH-21 HT for 2 meters $8

Kenwood BH-3 belt clip and hardware for Kenwood TH-21/31/41
series HTs. $8

MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15

Kenwood W09-0315 charger
This charger is used to charge the larger PB-21 H batteries
for the TH-21 series, and also on other Kenwood radios.
It produces 10.5 V DC at 42 ma, with a standard 2.1 mm
coaxial connector. $12

Kenwood Rubber duck antenna for the TH-21 HT
Shorter "Stubby Duck" from Kenwood. $20


Operator's Manual for Kenwood (Trio) TS-440 S:

This is a quality reproduction with a "comb" binding
that has been done by one of the professional reproduction
houses. W7FG I think.

This one has a plastic protector on the front, and is
in very nice condition. It includes schematic diagrams.
$18


Original Manuals for Kenwood equipment:
New ones have been added.

All manuals are in very nice condition, for Kenwood equipment.
All are original manuals only.

Operating manual for TM-2570/2550/2530 2 m xcvr $15
Operating manual for TW-4000 dual bander $15
Service manual for TW-4000 dual bander $20
Operating manual for TW-4100 dual bander $15
Operating manual for TH-21 HT for 2 m $8
Operating manual for TH-225, 2 m HT $12
Operating manual for TM-221/421 mobile $15
Operating manual for TH-241/441/541 mobile FM transceivers
...For 2 m, 440 MHz, & 1200 MHz. $12
Operating manual for TR-2400, 2 m HT $12
Service manual for TR-2600, 2 m HT $12
Operating manual for TR-7400, 2 m xcvr $8

Kenwood TM G-707 operating manual in Spanish:
Spanish version of the Operating Manual
for the TM G-707 dual band transceiver. New $10
All other manuals are English.

LF-30A Low Pass Filter $5
MC-30 & MC-35 hand microphones $5
MC-85 desk microphone $4
PB-1, PB-2, PB-3, & PB-4 battery packs $3
PS-6 power supply $6
SMC-24 speaker mic $4
SMC-25 speaker mic $4
SP-430 speaker $2
SP-820 Speaker $2

These are original Kenwood manuals only.


HT Belt Clips and Wrist Straps:

Belt Clips:
All include the hardware with the belt clip and are $8 each.
Kenwood BH-3 for Kenwood TH-21 / 31 / 41 series HTs
Motorola
Yaesu FT-207

Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, TR-2500, etc.
Kenwood TR-2400
Yaesu FT-209


Heath HM-2102 VHF Wattmeter:

Heath HM-2102 VHF wattmeter, covering 50 to 160 MHz.
Similar to the HM-102, but for VHF frequencies, with 250
and 25 watt scales. It can also be used to check SWR, and
has a remote sensor that can either be left inside the
meter, or separated from the actual meter. SO-239 connectors
in and out.

This particular meter works great. It looks really
terrific -- very close to perfect, with no defects that
I can find.

Paper work included for $50.


Low Pass TVI Filters:

A low pass TVI filter is added to the transmitter to reduce
harmonic interference. All have SO-239 connectors and are 50
ohm filters.

Bencher YA-1, high power, low pass TVI filter
If you need a more heavy duty filter for the output of
your amplifier, this one is ideal. It will take full legal
power plus, and has at least 80 db signal attenuation at
TV channel 2.
This one works great, and looks close to new. Bencher
currently sells these for about $90. This one is only $60.

B & W FL-10/1500
This filter cuts off just above 10 meters, and handles 1500
Watts. It is the latest model B&W filter.
In very nice condition, it looks very close to new. $40.

B & W FL-10/100 low pass filter
Similar to FL-10/1500, except power rating is only 100 Watts.
Use this one after your rig, and before your amplifier.
Nice shape for $18.

Para Dynamics PDC 1089
This filter is rated at a full Kilowatt, up to 30 MHz.
5 x 6 x 2 inch black box, instead of the more familiar long
enclosure. It looks like new. $25


Rubber Duck antennas for your HT:
All are for 2 meters, are in good condition,
and are $10 each, unless stated otherwise.

BNC - Standard length, about 7 inches long
BNC - Original from Kenwood TH-215, about 5 inches long
BNC - Stubby about 4.5 inches long

5/16 inch threaded, as used by Motorola and others
Stubby - 4 inches long

Type F connector - 6.5 inches long

PL-259 connector - 6.5 inches long
HyGain 275, still in original packaging

PL-259 connector - Stubby - 4.6 inches long
Centurion, still in original package

Special for Kenwood TH-21 HT threaded connector
Stubby, about 4.5 inches long - $20

BNC Stubby for 440 MHz, 3 inches long


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, and many miscellaneous accessories.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400