[Kenwood] psk31

[JOHN UNRATH]

Ask the person three blocks away to tell you how the signal looks on his 
waterfall display. It should look clean with no spaltter. Make sure all the 
processing is off and no ALC on the meter. 


How does voice work with the antenna system? What frequency is the antenna tuned 
for?

I use PSK31 on my Kenwood TS-940 with a home brew interface and antenna and it 
works fine.

John
K6JHU/5





________________________________
From: ron bigelow <rbigelow16 at comcast.net>
To: Kenwood at mailman.qth.net
Sent: Fri, May 13, 2011 8:14:55 PM
Subject: [Kenwood] psk31

Help!
Kenwood  ts 2000 radio using hrd and 780
For weeks I have been trying to get my transmit to work on psk31.
I hear the psk signal going out on a monitor and it sounds good.
But no-one answers except a person three blocks away.

I am running 30 watts. audio levels at 80% of rated power. The antenna a bw 65 
horz
folded dipole at 20 feet good loading and swr is good. But does not seem to get 
out of Dodge.
I am set up for 9600, speech compressor off amd using a home brew interface 
between my laptop , windows 7 and my radio.

It receives good from all over the country and beyond.

Any Ideas?

Thanks

Ron
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html