[Kenwood] TS-950S Transmit Mode at Power On

[Rob Atkinson]

Is there a key jack on the back for a foot switch or something like that?
Plug something into it to make sure it is open.

One of the first things to check when a box like that is acting funny is the
DC v. from the p.s.  It is built in with this rig I think.  Make sure it is
putting out at least a high 13 or 14.0 volts.  The control circuits with
these rigs can make them do strange things if the DC drops down.

Rob
K5UJ

On Sat, Jun 25, 2011 at 10:06 AM, Bob Farkaly <rfarkaly at san.rr.com> wrote:

> My TS-950S (with the digital add on pieces) has developed a problem that
> has me stumped. I haven+IBk-t found any answers on the internet or through
> the NIDXA and SDDXC reflectors (but thanks to everyone who pointed me here).
>
> When I push the Power button, the radio comes up in receive mode (as
> normal) but then switches to transmit mode within about one second. I have
> everything disconnected but the antenna and the power. The VOX is not on nor
> is the Rec/Send button depressed. This just started up last night after many
> years of flawless service.
>
> Any help very much appreciated.
>
> 73,
>
> Bob Farkaly, K9RHY
> 13163 Edina Way
> Poway, CA 92064
> +-1 858-674-4618
> +-1 619-602-2653
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>