[Kenwood] Accessories for Kenwood HTs, DTMF Mics, Manuals, etc. FS

Ken Simpson, W8EK W8EK at flham.net
Wed Jul 27 12:20:16 EDT 2011


Accessories for Kenwood HTs, DTMF Microphones, original
Kenwood Manuals and other Kenwood items For Sale:


Accessories for Kenwood TH-205, TH-215, TH-225, TH-415,
and other HTs in this series:

Original Kenwood Rubber Duck antenna from TH-215. $10

Kenwood BC-2 Charger for PB-2 batteries. $12

MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15

Kenwood Wrist Strap for TH-215, plus many other HTs. $4

BNC to PL-259 antenna adapter $5



Accessories for the Kenwood TH-21 / 31 / 41 series HTs:

Original Operating manual for TH-21 HT for 2 meters $8

Kenwood BH-3 belt clip and hardware for Kenwood TH-21/31/41
series HTs. $8

MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15

Kenwood W09-0315 charger
This charger is used to charge the larger PB-21 H batteries
for the TH-21 series, and also on other Kenwood radios.
It produces 10.5 V DC at 42 ma, with a standard 2.1 mm
coaxial connector. $12

Kenwood Rubber duck antenna for the TH-21 HT
Shorter "Stubby Duck" from Kenwood. $20


Kenwood DTMF Touch Tone Microphones:

Kenwood MC-46 DTMF Touch Tone Microphone
Touch tone DTMF microphone with 6 pin connector, as used on
TR-7730, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000,
TR-9130, and others. Up-down switch on top. 16 digit touch
tone pad. This one works fine, and includes paper work for $40.

Kenwood MC-48, DTMF Touch Tone Microphone
Round, 8 pin connector, will go with any Kenwood rig taking
this kind of connector (TM-201, TM-211, TM-221, TM-231,
TM-241, TM-2530, TS-50, TS-430, TS-440, TS-570, TS-850, TS-870,
TS-930, TS-940, TS-950, TW-4000, etc.). Has UP and DOWN
switches and PTT, along with 16 digit touch tone pad.
This one works fine, and looks extremely nice.
With paper work for $45.


Operator's Manual for Kenwood (Trio) TS-440 S:

This is a quality reproduction with a "comb" binding
that has been done by one of the professional reproduction
houses. W7FG I think.

This one has a plastic protector on the front, and is
in very nice condition. It includes schematic diagrams.
$18


Original Manuals for Kenwood equipment:
New ones have been added.

All manuals are in very nice condition, for Kenwood equipment.
All are original manuals only.

Operating manual for TM-2570/2550/2530 2 m xcvr $15
Operating manual for TW-4000 dual bander $15
Service manual for TW-4000 dual bander $20
Operating manual for TW-4100 dual bander $15
Operating manual for TH-21 HT for 2 m $8
Operating manual for TH-225, 2 m HT $12
Operating manual for TM-221/421 mobile $15
Operating manual for TH-241/441/541 mobile FM transceivers
...For 2 m, 440 MHz, & 1200 MHz. $12
Operating manual for TR-2400, 2 m HT $12
Service manual for TR-2600, 2 m HT $12
Operating manual for TR-7400, 2 m xcvr $8

Kenwood TM G-707 operating manual in Spanish:
Spanish version of the Operating Manual
for the TM G-707 dual band transceiver. New $10
All other manuals are English.

LF-30A Low Pass Filter $5
MC-30 & MC-35 hand microphones $5
MC-85 desk microphone $4
PB-1, PB-2, PB-3, & PB-4 battery packs $3
PS-6 power supply $6
PS-30 power supply $5
SMC-24 speaker mic $4
SMC-25 speaker mic $4
SP-430 speaker $2
SP-820 Speaker $2

These are original Kenwood manuals only.


HT Belt Clips and Wrist Straps:

Belt Clips:
All include the hardware with the belt clip and are $8 each.
Kenwood BH-3 for Kenwood TH-21 / 31 / 41 series HTs
Motorola
Yaesu FT-207

Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, TR-2500, etc.
Kenwood TR-2400
Yaesu FT-209


Rubber Duck antennas for your HT:
All are for 2 meters, are in good condition,
and are $10 each, unless stated otherwise.

BNC - Standard length, about 7 inches long
BNC - Original from Kenwood TH-215, about 5 inches long
BNC - Stubby about 4.5 inches long

5/16 inch threaded, as used by Motorola and others
Stubby - 4 inches long

Type F connector - 6.5 inches long

PL-259 connector - 6.5 inches long
HyGain 275, still in original packaging

PL-259 connector - Stubby - 4.6 inches long
Centurion, still in original package

Special for Kenwood TH-21 HT threaded connector
Stubby, about 4.5 inches long - $20

BNC Stubby for 440 MHz, 3 inches long


HF and VHF SWR Bridges:

Both of these cover from 3 to 150 MHz, covering HF, 6 meters,
and 2 meters, so are ideal for the new rigs with 6 meters and
2 meters in them. SO-239 connectors.

Quement SWB-2
This unit features two separate meters -- one for reading
forward power and another for reading SWR. This permits one
to easily monitor both the power going out, and the SWR on
the antenna at the same time.
It works fine and looks great. With paper work for $40.

Royce 2-100 Single Meter SWR Bridge / Field Strength Meter
This one works fine, and looks extremely nice. I do not see
any scratches on it, but it does have a previous owners name
on it. In its original box with original instructions. $32


MFJ 484 C "Grandmaster" Memory Keyer:

MFJ 484 C "GrandMaster" Keyer with Memories
This keyer has a built in sidetone, with volume and tone
adjustable on the front panel. Speed and weighting are
also adjustable from the front panel.
It has 4 large memories. You may install a 9 volt battery
to preserve memory contents during a power failure. It can
be powered by either a 9 Volt battery, a 9 to 12 V DC wall
wart, or your station 12 V DC power supply.

It is a nice eggshell white and wood grain enclosure that
matches the TenTec KR-2 paddle. This one works fine and
looks great.

With paper work for $55.


Cables for CW keyers and keys:

Cable for paddles
About 3 feet long, and with a 1/8 inch (3.5 mm) stereo
connector on the end, like used by most rigs. $8
As above, but 1/4 inch plug. $8

Cable for straight key
About 3 feet long, with a mono 1/8 inch (3.5 mm) phone
plug on it, as is used with a straight key. $5
As above, but 1/4 inch plug. $5


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, and many miscellaneous accessories.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400












More information about the Kenwood mailing list