[Kenwood] Kenwood Digest, Vol 87, Issue 14

[Dave Edwards]

I am pretty sure under "add or remove programs" the service pac you 
installed will be there. You can remove it and go back to service pac 2.
But I doubt very much if a service pac is your issue.
....Dave
----- Original Message ----- 
From: "Derek" <derekkoonce at att.net>
To: <kenwood at mailman.qth.net>
Sent: Tuesday, July 26, 2011 1:04 PM
Subject: Re: [Kenwood] Kenwood Digest, Vol 87, Issue 14


> Cannot go back since the SP3 is already installed and I have other
> software up and running. I would essentially have to rebuild from
> scratch. I'm trying to avoid this action.
>
> Derek Koonce
> KE6JTP
>
>
> From: "Dr. David Kirkby" <david.kirkby at onetel.net> Subject: Re:
> [Kenwood] Kenwood D700 software issues w/ WinXP SP3 machine To:
> kenwood at mailman.qth.net Message-ID: <4E2E47F0.5000304 at onetel.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed On 07/26/11
> 02:38 AM, derek wrote:
>
>> I recently had to rebuild my laptop after a hard disk failure. I have
>> reloaded WindowsXP and it is now at SP3. When I try to install the
>> Kenwood software for the D700, the setup program appears to have stalled
>> and does not do anything. Any help?
>>
> I'm not expert on Windows, but one thing that might be worth trying is to
> install the software before the service pack.
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html