[Kenwood] How to remove main tuning knob on TS-940S

[Garey Barrell]

Dave -

Slip off the rubber cover, it should just slip off, but may need a little coaxing after 30 years.  
Once it's off, just normal set screws.  Don't overtighten, as the shaft is easy to raise burrs on 
which make it difficult to remove the knob in the future.

73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
<www.k4oah.com>


Dr. David Kirkby wrote:
> The title pretty much says it all.
>
> I bought a TS-940S yesterday (my second one), but the main tuning knob is
> scratched. But when I bought my first 940S, it had a spare front panel with a
> good condition tuning knob.
>
> So I want to know how to remove the main tuning knob and fit it on another
> radio. I can't see any screw that I would expect to hold a knob in place. I very
> much doubt it is just a push-fit, and obviously don't want to pull it hard if
> its not designed to just push on.
>
> Dave