[Kenwood] Remote link audio

[Bob Bennett]

Rick,
    I am running across another somewhat similar issue. I can control my 
rigs remotely with my iPad. The problem is 1) being unable to TX audio 
from the iPad and 2) the there is a bad feedback loop and the audio on 
the rig gives feedback on the remote iPad speakers.  I wonder if your 
solution would work for me?

Bob/kg2rp

On 7/31/2011 4:17 PM, Rick Bates wrote:
> Hi all,
>
>
>
> I've put some thought into a problem and it's time to ask a question.
>
>
>
> Problem:  When connecting to a remote radio, radio control has been
> conquered but transporting remote audio to/from a local program is an issue.
>
>
>
> My 'solution' is to have the remote audio appear on the local computer as a
> soundcard.  A virtual soundcard would allow Ham Radio Deluxe or similar
> programs could simply route their audio to the (remote) soundcard.  Add a
> local mike and all modes are covered.
>
>
>
> Questions:  Does such a system exist?  If not, why not?  (If you're a
> designer/programmer, get busy.  It has more applications than ham radio.  A
> virtual soundcard would also make net streaming and other uses easier.)
>
>
>
> I'm aware of systems such as RemoteRig, but was looking for a simpler (and
> cheaper) solution.
>
>
>
> Thanks,
>
>
>
> Rick WA6NHC
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1390 / Virus Database: 1518/3801 - Release Date: 07/31/11
>
>