[Kenwood] TL-922

[Rob Atkinson]

Give AES in Milwaukee a call.  I think they have a shop there still.

But why not see this as an opportunity to set up a shop, purchase some
tools, and learn about the amp?   A great starter article on amplifier care
and maintenance by Ward Silver is in the September 2003 QST on p. 33.  In
fact, that's its title, Amplifier Care and Maintenance : )

First you  need to get the manual, service manual if there is one.  If the
922 stock, is designed to be keyed by old exciters that use a high voltage
line, you can get a box will work with modern exciters from

http://www.theheathkitshop.com/

A little deoxit here and there, tightening a few nuts and bolts might do
wonders for the amp and your confidence!

GL and 73

Rob
K5UJ


On Sat, Apr 23, 2011 at 2:01 PM, <takenchan at aol.com> wrote:

>
> And I still have no local help. I still need someone more experienced with
> these amps than I (zero bench time) to go over this amp . It has a few
> intermittent issues as any older amp might. I am not the original owner.
> Please, no more "advice' just some qualified person who might help. Thanks
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>