[Kenwood] TS-180S Mystery
w9jdh at netzero.net
w9jdh at netzero.net
Sat May 22 15:18:53 EDT 2010
Hello all.
I am glad this topic has come up. I have a TS 430S with basically this exact problem, but
the difference being that after the rig has been on a short time the critter acts as if
the the antenna has been unplugged. Another problem is when I connect the plug to the
radio, it does exactly the same as yours. I have checked all connections, and have found nothing wrong. I now suspect either a bad SO-239 connector, or a bad relay.
While I am typing, I may as well ask about another problem. I have a very good TS-120S
that has a problem with the transmit metering. It will not indicate the Ic, or the ALC. I
read where there was a problem with the pushbutton switch on the front panel. I have
cleaned the switch, with no results, and it shows OK when I check it with a VOM. It
started out as an intermittent problem, but now it doesn't work at all.
Thanks in advance for your knowledge and advice.
73,
Jimmy, W9JDH
More information about the Kenwood
mailing list