[Kenwood] TS-2000 Help please

[k9mi at comcast.net]

Hi Doug 



I don't know anything about the 2000, but it sounds like you're software is somehow working "split" on the digital frequencies. Do you use SSB to transmit digital modes, or does the rig have it's own mode button for digital modes? 



Maybe try a different software for digital modes to test it and see if it still does it??? 



Good luck, 73 Mike K9MI 






----- Original Message ----- 
From: "Doug Shields" <w4das at comcast.net> 
To: Kenwood at mailman.qth.net 
Sent: Saturday, July 17, 2010 9:36:04 PM 
Subject: [Kenwood] TS-2000 Help please 

Hello everyone, 

     I have a problem with a TS-2000 that I can not figure out.  I have used 
the radio extensively in the past with a Signalink USB interface for digital 
modes and it has worked perfectly.  I took the radio to a Special Event 
operation several weeks ago.  I just got around to getting it hooked up 
again and I have a problem. 

    Running Ham Radio Deluxe I can receive and decode any mode I want. 
However, when I try to transmit, the TS-2000 INSISTS on transmitting on the 
Sub-receiver frequency.  I have looked through the menus several times and I 
can't see anything obviously wrong.  Does anyone have a suggestion as to 
what I can change to get the radio to transmit on the Main frequency? 

    BTW, normal CW and SSB works fine.  This is most frustrating. 

  

Doug  W4DAS 

______________________________________________________________ 
Kenwood mailing list 
Home: http://mailman.qth.net/mailman/listinfo/kenwood 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Kenwood at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html