[Kenwood] TS-530S Bandswitch

[n6wk at n6wk.com]

  You can get them here:
http://www.k4eaa.com/parts.htm

On 7/6/2010 12:12 PM, Bill Kuhn wrote:
> I have a 530S with cracked couplers.
>
> Where can I get a brass one (or 2)?
>
> Bill Kuhn
>
> 73 DE NO0OO
>
> ________________________________________________________
>
>
> Date: Mon, 05 Jul 2010 16:25:27 -0700
> From: n6wk at n6wk.com
> Subject: Re: [Kenwood] TS-530S Bandswitch
> To: kenwood at mailman.qth.net
> Message-ID:<4C3269E7.5040506 at n6wk.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>    Dennis,
> You need to check the coupler on the Band switch shaft between the front
> and rear sections. It sounds like yours has cracked and now is loose.
> The white plastic couplers crack with age. Best fix is to replace it
> with a brass one.
> It's a common problem on these old Kenwood Hybrids
>
> 73,
> Gordon
> N6WK
> Kenwood Hybrid Repair
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
E-Mail Disclaimer This communication and any documents, files, or previous e-mail messages attached to it constitute an electronic communication within the scope of the Electronic Communication Privacy Act, 18 USCA 2510.This communication may contain non-public, confidential, or legally privileged information intended for the sole use of the intended recipient(s). The unlawful interception, use or disclosure of such information is strictly prohibited under 18 USCA 2511. Any review, reliance, or distribution by others or forwarding without expressed permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.