[Kenwood] TS520 Receive Audio Level Problem

[k0bx at arrl.net]

I have had that problem with several of the Ameritron amps.  It is the relay sticking, so when you go back to receive, you are receiving through the tubes.

The fix??  Sometimes alignment of the relay points or replacement.  Maybe just a good cleaning.

Joe K0BX

Stop the insanity!

Please do not add me to any distribution lists (Joke, Stories or Junk) without my permission.

--- On Wed, 2/3/10, L P <lpage at conwaycorp.net> wrote:

From: L P <lpage at conwaycorp.net>
Subject: [Kenwood] TS520 Receive Audio Level Problem
To: kenwood at mailman.qth.net
Date: Wednesday, February 3, 2010, 5:52 AM

I am running a TS-520se into a AL-811 to a Palstar AT1KP tuner with G5RV antenna. The intermittent problem I have noticed, is that the receive audio will be very low (like a radio would sound if antenna disconnected) until i key the mic. After the mic is keyed and released, the receive audio becomes normal (Loud and clear) again. Transmit is OK. Any ideas on things I should check? Thanks! 73ssss

Larry
K5DNA
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html